Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Windows & Doors in Fort Lauderdale, FL | TruePane Windows & Doors
We provide independent Therma-Tru service across Fort Lauderdale, and the one thing that separates our work here is this: every door slab we touch has to survive Broward County’s High Velocity Hurricane Zone code and canal-driven salt air that rots hardware miles from the ocean. TruePane Windows & Doors has been setting and repairing Therma-Tru entry doors, storm doors, and fiberglass slabs in this city long enough to know that a door hung to Ohio standards will fail here within three years. Call (754) 310-3589 for a free estimate. We are not a Therma-Tru authorized dealer. We are an independent shop that knows these doors inside and out because we have fixed the ones other crews walked away from.
Why Fort Lauderdale Residents Choose Us for Therma-Tru Service
We have worked on Therma-Tru slabs in Coral Ridge, Rio Vista, and Lauderdale Manors, and we have seen what Fort Lauderdale humidity does to a door that was not installed with marine-grade hardware. Dale Kessler, our owner, grew up in his father’s glass shop in Columbus, Ohio, where he learned to measure a rough opening and cut glass before he could drive. That training carries into every Therma-Tru door we pull and rehang here. We stock OEM Therma-Tru weatherstripping, sweeps, and hinges locally, so we are not waiting on a warehouse three states away when your front door starts binding in July. Our relationship with Therma-Tru sales & service work is built on hundreds of in-field repairs across Broward’s HVHZ landscape, and we bring that depth to every call.
Common Therma-Tru Windows & Doors Problems We Solve in Fort Lauderdale
- Fiberglass skin delamination and bubbling on south-facing door slabs. Fort Lauderdale’s UV index and 75%+ humidity can break down the finish layer on Therma-Tru Classic-Craft and Smooth-Star doors that catch direct sun for six hours a day. We inspect the slab, determine whether the skin can be refinished or the door needs replacement, and quote both paths honestly.
- Bottom sweep and weatherstripping compression set on entry doors. A Therma-Tru door in Fort Lauderdale sits in humid air year-round, and rubber sweeps flatten into a useless ribbon faster here than anywhere else in the state. We replace them with genuine OEM parts and check the threshold for level while we are at it.
- Hinge and lock hardware corrosion accelerated by canal-salt air. We have pulled Therma-Tru hinges off doors in Rio Vista that showed pitting corrosion from canal exposure even though the Atlantic is a mile east. We swap in stainless steel hardware when the original zinc-coated hinges are done.
- Improperly shimmed door frames in CBS masonry openings. Most Fort Lauderdale homes are 1950s-1970s concrete block construction. A Therma-Tru frame set with wood shims and standard anchors will shift over time, causing the door to bind or fail to latch. We reset frames with pressure-treated buck framing and HVHZ-compliant anchor spacing.
- Failed or fogged glass inserts in Therma-Tru door lites. Salt air and humidity work their way into double-pane glass inserts on entry doors, and once the seal goes, you get condensation between the panes. We source and install replacement lites that match the original spec.
Therma-Tru Service in Fort Lauderdale: What Local Conditions Mean for Your Equipment
Fort Lauderdale is one of only two counties in Florida, alongside Miami-Dade, that sits inside the High Velocity Hurricane Zone. That designation changes everything about how a Therma-Tru door gets installed here. Every slab we set has to land on anchor spacing and buck framing that passes Broward’s stricter HVHZ inspection, a standard that does not apply across the county line in Palm Beach. A Therma-Tru door that was hung correctly in Boca Raton may not pass inspection or hold up in Coral Ridge Isles, which is why proper Fort Lauderdale Window Installation matters for HVHZ compliance. Our techs rehung a Therma-Tru Classic-Craft entry door on a 1960s CBS ranch in Coral Ridge where the bottom sweep had compressed flat and the steel hinges showed pitting from canal humidity. We pulled the slab, reset the pressure-treated buck with HVHZ-compliant anchors, and installed OEM weatherstripping plus stainless hinges before rehanging. The door now closes square and holds back driving rain. That is the difference between a door that works and a door that just looks like it works.
Therma-Tru Models & Products We Service in Fort Lauderdale
We work on the full Therma-Tru residential line that is common in this market: Classic-Craft, Smooth-Star, Fiber-Classic, and Pulse. Our approach is straightforward. We install genuine Therma-Tru OEM weatherstripping, sweeps, and hinges for fit and marine-grade performance, but we will use quality aftermarket stainless steel fasteners and hardware when salt corrosion demands it. If the fiberglass slab is sound, we re-hang and reseal. If delamination or frame rot from concrete contact is present, replacement is the only lasting fix, and we will tell you that before we touch a single anchor. We keep common OEM weatherstripping profiles and sweep lengths in our local stock so a Fort Lauderdale repair does not turn into a two-week waiting game.
Therma-Tru Service Pricing in Fort Lauderdale
Therma-Tru service pricing in Fort Lauderdale depends on what has failed and what the door is up against. Replacing a bottom sweep or weatherstripping typically runs $90 to $180 including the OEM part and labor. Rehanging a binding door with new hinges and shims usually lands between $250 and $450. A full slab replacement for a delaminated or rotted Therma-Tru door starts around $1,200 and goes up with glass lites, sidelites, and HVHZ-impact hardware. Our free estimate walks you line by line through parts and labor before you sign anything. Call (754) 310-3589 and we will put it in writing.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Therma-Tru Windows & Doors in Fort Lauderdale
The stickiness comes from the frame shifting in a concrete block opening, not from the door itself. CBS masonry homes settle and move with temperature swings, and a Therma-Tru frame that was shimmed with wood and standard anchors will bind against the slab. We reset the frame with pressure-treated buck framing and HVHZ-compliant anchors so the door swings clean. Call (754) 310-3589 for a free inspection and quote.
If the fiberglass slab is sound and the frame has not rotted, replacing the weatherstripping and bottom sweep is usually all it takes. We install genuine Therma-Tru OEM parts sized for your specific model. If the slab shows delamination or the frame has concrete-contact rot, band-aid weatherstripping will not fix the underlying problem. Call (754) 310-3589 and we will tell you which path applies before quoting a single dollar.
No. A Therma-Tru door slab is not impact-rated on its own. In Fort Lauderdale’s High Velocity Hurricane Zone, any permitted replacement door has to carry HVHZ-specific Florida Product Approval for the full assembly: slab, frame, anchors, and hardware. We can spec and install Therma-Tru models with impact-rated glazing and HVHZ-compliant anchoring, but the base slab alone will not pass a Broward inspection. Ask us about Impact Windows in Fort Lauderdale if you’re upgrading the full opening. Call (754) 310-3589 to talk through compliant options and exact pricing.
Fort Lauderdale’s 300-plus miles of interior canals push salt-laden air deep into neighborhoods like Lauderdale Manors and Progresso. That air settles on hinge metal and corrodes it just as fast as oceanfront exposure. We replace the failed hinges with stainless steel hardware that holds up to canal salt, and we pair it with OEM weatherstripping for a complete seal. Call (754) 310-3589 for a free quote on a hinge and hardware swap.
Broward’s HVHZ code requires anchor spacing that matches the approved product drawing for your specific Therma-Tru assembly, and that spacing is tighter than what is typical in wood-frame or non-HVHZ construction. We measure the rough opening, consult the Florida Product Approval documents, and set anchors to the exact spec before the door goes in. Call (754) 310-3589 and we will quote your door with the correct spacing in writing.
Service Areas Near Fort Lauderdale
TruePane serves Fort Lauderdale service area and nearby Broward communities including Hollywood, Pembroke Pines, Miramar, Pompano Beach, and Coral Springs. If you are just south of the county line, see our Therma-Tru service in Hollywood page or our Therma-Tru service in Pembroke Pines page for details specific to those cities.
Book Your Therma-Tru Service in Fort Lauderdale Today
A live person answers at (754) 310-3589. Tell us what your Therma-Tru door is doing, and we will schedule a visit, measure the opening, and put your options in writing. Measure twice, spec it right, and put it in writing, the frame does not forgive shortcuts.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.