Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Why Fort Lauderdale Homeowners Choose PGT Windows & Doors
We service and install PGT in Fort Lauderdale as an independent provider, not a factory-authorized dealer. Our crews work on PGT WinGuard, SpectraGuard, PremierVue, and 7700 Series units every week, which means we know exactly which hardware, gasket, and glass-pack failures these products develop in Broward County salt air and how to fix them without voiding your warranty. That combination of daily hands-on familiarity and honest independent standing is what sets our PGT work apart from a brand brochure or a big-box installer. Call (754) 310-3589 for a free estimate on any PGT repair, tune-up, or replacement in Fort Lauderdale.
Why Trust TruePane Windows & Doors for Your PGT Windows & Doors?
Our Fort Lauderdale crew works on PGT WinGuard, SpectraGuard, and PremierVue lines daily. We track every model’s hardware, gasket, and glass-pack evolution across production years, so we know which failures are factory-related, which are installation-related, and which are just coastal wear. That distinction matters when you are deciding between a $40 balance replacement and a $1,800 sash replacement.
Dale Kessler grew up in Columbus, Ohio, where his father ran a small glass shop out of a converted garage on the east side, so he was measuring rough openings and cutting lites before he could legally drive. He trained at Columbus State Community College’s building trades program, then spent the better part of two decades putting that education to work one frame at a time. That grounding is why we read a structure’s existing framing before we quote a PGT job in Fort Lauderdale. A replacement window is only as good as the anchorage around it, and in Broward County’s High Velocity Hurricane Zone, anchorage is everything.
We are background-checked, uniformed technicians, not subcontractors in unmarked trucks. Every PGT service call gets the same treatment: measure the opening twice, spec the parts in writing, and register the workmanship under our 90-Day Done Right Promise. If it is not done right, we make it right, no paperwork fights and no arguing.
Common PGT Windows & Doors Problems We Fix in Fort Lauderdale
Fort Lauderdale’s 300-plus miles of interior canals push salt-laden air deep into residential neighborhoods miles from the Atlantic. That corrosion is not cosmetic; it is mechanical. Here are the five PGT failures we see most often across Coral Ridge, Lauderdale Manors, Progresso, and the canal-front streets of Las Olas Isles and Rio Vista:
- Fogged or hazed glass packs on WinGuard and SpectraGuard impact units. Laminated glass delamination or edge-seal failure typically appears after 8 to 12 years in Fort Lauderdale’s salt and humidity, often showing as a permanent haze between the panes that wipes off neither side. The structural integrity usually remains, but the view does not. We replace the glass pack when a matching unit is available, leaving your existing frame in place where it is sound.
- Roller and sliding panel binding on low-sill 7700 Series doors. Salt crust and canal debris build up in the weep system, then the stainless or nylon rollers grind through it until the door drags or seizes. On canal-front properties in Las Olas Isles, we have pulled aluminum sliding glass door rollers that look like they sat in brine for a decade. Cleaning the track is temporary; replacing the rollers and clearing the weep slots is the fix.
- Stripped casement crank operator gears on older WinGuard models. The folding handle develops play, the gear teeth skip, and suddenly a downpour finds the sash cracked open because the crank will not seat it. We replace the operator assembly and re-align the sash so the multi-point locks engage fully.
- Torn or brittle corner gaskets on impact models. This is the most common find on unmaintained Fort Lauderdale installs. Corner gaskets dry out under the UV and salt, crack at the seams, and break the air and water seal no matter how tightly the sash is pulled in. The glass is fine; the weatherstrip is not. We replace gaskets with the correct factory profile.
- Block-and-tackle balance failures on double-hung WinGuard units. When a lower sash slams shut or will not stay up, the balance kit has snapped. Our tech arrived at a 2007 townhouse off SE 15th Ave with a double-hung WinGuard whose lower sash would not stay up. We pulled both sashes, replaced the balances with 35-lb OEM kits and new take-out clips, cleaned the vinyl track of salt crust, and reset the cam locks. The window now lifts with two fingers and closes tight against the new corner gaskets.
PGT Parts & Our Repair-vs-Replace Approach
We replace worn PGT hardware and gaskets with OEM parts whenever factory stock still exists. PGT’s custom extrusions and glazing beads make aftermarket seals a poor fit; a generic gasket will not seat correctly in a WinGuard frame, and the air and water leak you were trying to fix comes right back. For cosmetic trim or stationary panel components where factory inventory has been discontinued, we will use quality aftermarket materials and tell you exactly what we substituted and why.
Repair is our first recommendation when the glass pack and frame are sound. Replacement makes sense only when the frame is bent, deeply corroded, or the laminated glass is delaminated beyond a simple pack swap. We will show you the difference and put both options on paper, side by side, so you decide with your eyes open. Call (754) 310-3589 for an honest assessment of your PGT unit.
Our PGT Service Process - Step by Step
Measure twice, spec it right, and put it in writing. The frame does not forgive shortcuts. That is how we run every PGT service call in Fort Lauderdale:
- 1
Diagnosis on paper. We identify the exact PGT model and production year, inspect the glass pack, frame, hardware, and weatherstripping, and write down what failed and why. You get a line-item quote before any work begins.
- 2
Parts confirmation. We verify OEM availability for your specific WinGuard, SpectraGuard, or 7700 series components. If factory stock is discontinued, we present the aftermarket option and its tradeoff before ordering.
- 3
Repair or installation. We work to the opening, not around it. On Fort Lauderdale CBS ranch homes from the 1950s through 1970s, that means pressure-treated buck framing and HVHZ-compliant anchor spacing set to masonry, not wood framing shortcuts.
- 4
Operational test and seal check. Every sash is cycled, every lock engaged, every weep slot cleared. We verify the unit operates smoothly and seats tight against new gaskets.
- 5
Warranty registration and handoff. Under The Keystone Standard, we register both manufacturer warranty layers in writing and state the durations before the truck leaves the driveway. You receive a record of what was installed and what it is covered by.
PGT Products We Service & Install in Fort Lauderdale
We repair and install the PGT product lines most common across Fort Lauderdale’s housing stock: PGT WinGuard aluminum and vinyl impact windows, PGT SpectraGuard impact-rated units, PGT PremierVue contemporary lines, and the PGT 7700 Series sliding glass doors. That covers hurricane impact windows, vinyl impact windows, and full frame replacement work done to HVHZ code. We keep the most common PGT roller kits, balance assemblies, crank operators, and glazing beads in local stock for fast turnaround, with special-order OEM parts typically arriving in one to two weeks.
We Also Service These Brands
PGT is not the only product line our Fort Lauderdale crews work on. We are an authorized installer for more than a dozen manufacturers, including CGI, CWS, ES Windows, and ECO Window Systems. If your house has a mix of brands across different openings, we can quote them side by side on one piece of paper so you see exactly what you are buying.
FAQs - PGT Windows & Doors Service in Fort Lauderdale
In most cases, yes, we can replace the glass pack alone when the frame and hardware are still sound. PGT glazing beads and gaskets are serviceable, and a laminated glass pack swap typically runs significantly less than a full window replacement. If the frame is bent or corroded through, we will tell you straight and quote the replacement. Call (754) 310-3589 for an exact quote, estimates are free.
Almost certainly not. Fort Lauderdale’s rainy season pushes debris and salt slurry into the bottom track of 7700 Series and other PGT sliders, and the rollers corrode or clog until the door drags. We clean the track, clear the weep system, and replace the roller assemblies as needed. The door usually slides like new without replacing the whole unit. Call (754) 310-3589 to schedule a diagnosis.
That fog is laminated glass delamination or edge-seal failure, commonly showing up after 8 to 12 years in Fort Lauderdale’s salt air and humidity. The impact laminate is still doing its structural job, but the insulating seal has failed. It is not a safety issue, just a failed seal that needs a glass pack replacement to restore the clear view and the insulating value. We can assess whether your specific WinGuard or SpectraGuard unit qualifies for a pack swap.
We keep common PGT roller kits, balance assemblies, crank operators, screens, and glazing beads in local stock, so many repairs are completed in a single visit. Odd-size screens or discontinued parts may require a special order, typically one to two weeks out. We will tell you up front which category your job falls into before you pay a cent.
No. Using OEM PGT parts and following the manufacturer’s installation and glazing specifications is what keeps a warranty valid, not the badge on the truck. As an independent PGT service provider, we use factory parts wherever available and document every repair. If a factory-related defect exists, we point you to the warranty claim process and help you file it.
PGT repair costs in Fort Lauderdale depend on the failure and the model. A balance replacement or roller kit swap on a WinGuard or 7700 Series typically runs $150 to $400 per opening; a glass pack replacement for a delaminated impact unit runs $600 to $1,400 depending on size and glass spec; a full-frame PGT replacement runs $900 to $2,800 per opening depending on the product line, size, and HVHZ anchoring requirements. Seniors and veterans receive a permanent 5% discount, and we offer $50 off any repair over $250. Call (754) 310-3589 for a written, line-item quote on your specific PGT unit, estimates are free.
Book Your PGT Service in Fort Lauderdale, FL
If you have a PGT window or door that is fogged, dragging, or not closing square, call (754) 310-3589. We will diagnose it against the actual failure mode, not a brochure, and put the fix in writing. Free estimates. The Keystone Standard on every job.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After