Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Custom & Geometric Windows in Fort Lauderdale: What to Know First
ES Windows custom and geometric units in Fort Lauderdale typically need service when a seal fails on a radius lite, a corner weld splits on an angled frame, or the original installer left the rough opening out of square and the sash has been fighting it ever since. TruePane Windows & Doors services, repairs, and replaces ES Windows custom and geometric windows as an independent ES Windows service provider. Most custom-lite replacements take two to three weeks from template to install, depending on the glass shape and whether we’re matching an existing tint. Call (754) 310-3589 and we’ll tell you straight what the job needs.
This page is for homeowners in Fort Lauderdale who already own ES Windows product and now face a fogged arch, a binding trapezoid, or an oversized opening that was never framed right in the first place. It’s also for people planning a custom ES Windows install and wanting it done correctly the first time.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid aluminum frame, but their custom and geometric lines have specific failure patterns we see across Fort Lauderdale. Here’s what we find on service calls and what we do about it.
- Fogged insulated glass on ES PureVue radius and arched units. The curved lite’s secondary seal lets go after years of South Florida humidity cycling. The glass shows moisture between the panes, typically starting at the apex of the arch where seal stress concentrates. We template the exact radius, order a matching low-E curved lite, and rebuild the unit. The frame usually stays in place because it’s still structurally sound.
- Corner weld fracture on ES Elite Series triangles and trapezoids. Angled frames put more stress on the welded corners than rectangles do. Fort Lauderdale’s afternoon heat expands the aluminum, and over ten or fifteen years that expansion- contraction cycle works the corners until a weld cracks. We see it most often on units wider than six feet. We re-weld, reinforce the corner, and reset the square before the sash goes back in.
- Sliding geometric sashes that bind on ES Series 7000 horizontal sliders. When a home settles, the track geometry shifts. A custom-width slider that ran clean for years starts dragging on one side. Most companies try to shim the frame. We correct the rough opening first, then reset the track relationship. The sash glides after that because the frame is where it belongs.
- Original installer errors on ES Windows oversized openings. We’ve rebuilt several Fort Lauderdale jobs where the first crew never accounted for wind load on a giant fixed picture unit or a wide radius top. The frame flexed, the glass stressed, and the seal failed early. Our fix is a full removal, re-flashing, and reset with proper anchors rated for coastal exposure. Then we template the replacement lite and install it square.
- Obsolete ES Windows hardware on custom casement and awning units. Some older ES lines used hinge and operator hardware that the manufacturer no longer stocks. When that hardware wears out, parts become a scavenger hunt. We keep a shelf of salvaged OEM pieces in the shop for exactly this situation, and when OEM isn’t available, we machine-match a quality aftermarket replacement that fits without modifying the sash profile.
Our ES Windows Custom & Geometric Windows Process
Every custom and geometric ES Windows job follows the same sequence. It works for us because it removes guesswork before any glass is ordered.
- 1
Call and tell us what you’re seeing. A live person answers at (754) 310-3589 and listens. If it’s a fogged arch lite, a binding sash, or a cracked trapezoid, we’ll tell you what’s likely happening and whether we need to see it in person.
- 2
On-site diagnostic and measurement. A background-checked, uniformed technician comes to your Fort Lauderdale home and measures every opening twice. For geometric units, we template the actual curve or angle rather than trusting the original order sheet. Frames move. Templates don’t lie.
- 3
Parts decision on paper. We quote OEM ES Windows parts where they’re still available and warranty-smart to use. Where OEM is obsolete or price-doubled, we walk you through the quality aftermarket option and what it means for the lifespan and fit. You see both numbers side by side before you decide.
- 4
The work. We remove, repair or replace, re-flash where needed, and set the unit square. On custom lites, the replacement glass ships from our supplier to our shop, we inspect every edge and seal before it goes on the truck, then it goes in your frame the same visit.
- 5
The test. We operate the sash through its full range, check the reveal on all sides, and confirm the seal is seated. If it’s an impact unit, we verify the anchoring is to spec.
- 6
Warranty registration before we leave. Both manufacturer warranty layers get registered in writing with durations stated. The 90-Day Done Right Promise covers our workmanship. If the pane is not true, the job is not done.
What ES Windows Custom & Geometric Windows Costs in Fort Lauderdale
Here’s honest pricing for the common scenarios. These are ranges, not bids. Your exact number depends on size, glass type, frame condition, and whether we’re matching an existing tint or impact rating.
| Job | Typical Range |
|---|---|
| Replace fogged arched or radius glass lite (custom template, low-E match) | $650 - $1,450 per lite |
| Re-weld and reinforce cracked corner on triangle/trapezoid frame | $275 - $600 |
| Rebuild oversized fixed picture unit (new lite, anchors, flashing) | $1,400 - $3,800 |
| Replace obsolete hardware on custom casement/awning | $180 - $420 per sash |
| Full custom geometric replacement window (new frame + impact glass) | $1,900 - $5,500 installed |
What moves the price: glass area, curvature, whether impact rating is required, and how far out of square the opening is. We quote line items on paper before work starts, and the number on the quote is the number on the bill. Call (754) 310-3589 to schedule your free estimate.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been serving Fort Lauderdale and surrounding communities for over 42 years through a heritage of craft Dale Kessler learned in his father’s glass shop in Columbus, Ohio. That matters because this work is not something a franchise playbook handles well. Custom and geometric ES Windows units need a technician who understands frame geometry, coastal wind load, and how aluminum behaves after two decades of salt air.
Every job carries the 90-Day Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. If it’s not done right, we make it right. No paperwork, no arguing. And we quote other trusted manufacturers side by side where a switch makes sense, PGT, CGI, CWS, ECO Window Systems. We’ll put the Keystone Standard against any of them on paper so you can see exactly what you’re buying.
Live person answers the phone, 24/7. We’ll be there when we say. A square deal on every quote.
FAQs
In most cases, yes. The curved insulated glass lite is replaced while the original aluminum frame stays in place, provided the frame is still square and structurally sound. We template the exact radius, order a matching low-E curved lite, and rebuild the unit in the existing frame. Call (754) 310-3589 and describe the shape and rough dimensions, and we’ll tell you if it’s a glass-only job before anyone schedules a visit.
It depends on the age of the unit and whether the original warranty is still active. ES Windows warranties cover the frame and glass separately in many cases. As an independent ES Windows service provider, we register both manufacturer warranty layers in writing before we leave, and we specify OEM parts whenever they’re still available and warranty-smart to use. When OEM is not available, we show you the aftermarket option and what it means on paper before any money changes hands.
Fort Lauderdale heat expands aluminum frames, and if the rough opening was never square or the slab has settled, a geometric unit has less tolerance to absorb that movement than a rectangle does. We see it constantly on triangles, trapezoids, and wide sliders in older homes. The fix starts with correcting the opening or resetting the track relationship, not with forcing the sash. Our technicians measure every opening twice before quoting, and we’ll tell you honestly whether the fix is a shim, a reset, or a full re-frame.
Most custom and geometric glass replacements take two to three weeks from template to install in Fort Lauderdale. The curve or angle has to be cut and tempered to order, and matching an existing tint or impact rating adds a few days. If the frame itself needs rebuilding or reinforcement, that adds time depending on the scope. We’ll give you a written date before we order the glass, and we’ll hit it.
That depends on the age of the frame, the failure mode, and whether the unit still meets current code for your location in Fort Lauderdale. Homes close to the Intracoastal or the beach may be under stricter wind-load requirements than when the original windows went in. If the frame is square and the failure is isolated to the lite or a corner weld, repair usually makes sense. If the anchors are undersized for coastal exposure or the frame has multiple stress cracks, replacement is the honest call. We’ll walk through both options with numbers on paper and let you decide.
Call (754) 310-3589 to schedule your free estimate. We’ll measure, we’ll quote, and we’ll put it in writing. Measure twice, spec it right, and put it in writing - the frame does not forgive shortcuts.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.