ECO Window Systems Custom & Geometric Windows Nationwide | TruePane Windows & Doors

ECO Window Systems Custom & Geometric Windows in Fort Lauderdale: What to Know First

We provide independent ECO Window Systems custom and geometric window service across Fort Lauderdale, from arched units in Victoria Park to massive trapezoid openings facing the Intracoastal. Most ECO custom and geometric window repairs run between $340 and $1,900 depending on glass type, frame condition, and whether the unit needs reglazing or full replacement. You’ll get a written line-item quote before any work begins, and a live person answers when you call (754) 310-3589.

Call (754) 310-3589

This page is written for homeowners who own ECO Window Systems products and need honest answers about custom shapes, geometric glass, and what breaks first in South Florida’s salt air. If you’re looking at a fogged radius window or a trapezoid that won’t seal, you’re in the right place.

How ECO Window Systems Products Fail - and How We Fix Them

ECO Window Systems builds a solid product, but Fort Lauderdale tests every manufacturer the same way: heat, humidity, salt, and hurricanes. Here’s what we actually see on custom and geometric ECO units in this market, and how we address each one:

• Radius and arch unit seal failure, especially on ECO’s older formed-radius lines. Bent-frame glass carries more stress at the curve than square lites ever will. The sealant at the apex of an arch flexes with every temperature swing, and after six or seven Fort Lauderdale summers, the argon leaks out and you get that milky fog. We reglaze with fresh desiccant and a marine-grade sealant rated for continuous UV exposure, not the standard stuff that breaks down at the waterline.
• Geometric corner joint separation on trapezoids and pentagons. ECO’s welded corners hold up well on rectangles, but a 135-degree angle on a big trapezoid concentrates load differently than a 90. We’ve pulled units where the corner weld cracked and the glass shifted a quarter inch, letting water ride the frame channel into the rough opening. The fix is disassembly, cleaning the weld seat, and re-welding with the sash pinned flat on a jig, not propped on sawhorses. Then we square the opening with shims before the unit goes back.
• Awning-style geometric windows with broken torque operators. ECO uses a couple of different operator mechanisms depending on the series, and the angled frames on geometric awnings put more strain on the gear teeth than a standard rectangle. When the operator strips, the window sags open or won’t close against the seal. We stock common replacements and source OEM hardware when the series calls for it. If the operator is discontinued, we’ll tell you plain and quote a retrofit rather than patch it for one more season.
• Impact-rated custom shapes with edge-clouding at the laminate line. On ECO impact units, the lamination process on curved and angled glass is more demanding than flat stock. We see edge clouding on custom impact windows that sit in direct afternoon sun, where the laminate edge wicks moisture if the edge seal wasn’t perfect from the factory. It’s not always a warrantable defect, and arguing that with a manufacturer is a fight homeowners shouldn’t fight alone. We diagnose the exact failure point and document it with photos, so if there’s a warranty claim to make, you’ve got a real paper trail.
• Oversized fixed geometric windows with cracked outer lites from wind-load flex. Fort Lauderdale code demands high design pressures, but a big trapezoid on a west-facing wall catches gusts that a square window sheds. The frame flexes microscopically, the glass takes the load, and eventually a stress crack runs from the corner. We replace the lite with glass cut to the same spec and pressure rating, and we’ll also check the rough opening for movement before we reinstall. A new pane in a moving opening is just the next crack waiting.

Our ECO Window Systems Custom & Geometric Windows Process

When we take on an ECO Window Systems custom or geometric window job in Fort Lauderdale, we work it the same way on every call so nothing slips:

1. 1
   Measure and inspect. Our technician measures every opening twice and reads the existing framing before quoting anything. Dale Kessler started measuring rough openings before he could drive, and that habit is baked into every job we run.
2. 2
   Document the failure. Photos, notes, and a written diagnosis of what failed and why. If there’s a warranty angle, you’ll have the documentation to pursue it.
3. 3
   Quote the parts decision. We compare OEM against quality aftermarket on paper, side by side, so you see exactly what you’re buying and what the difference costs. No surprise line items later.
4. 4
   Do the work. Frame repair, glass replacement, reglaze, hardware swap, whatever the job calls for. Most ECO custom window work we handle in one visit.
5. 5
   Test it. We cycle the sash, check the seal, run water where it matters, and verify the unit sits true in the opening. If the pane is not true, the job is not done.
6. 6
   Register the warranty and leave you the paperwork. Both manufacturer warranty layers go in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s on every job we do.

What ECO Window Systems Custom & Geometric Windows Costs in Fort Lauderdale

Here’s honest pricing on the ECO Window Systems work we handle most in Fort Lauderdale:

• Reglaze a single arched or radius ECO unit: $340-$720 depending on size and whether the frame needs rework.
• Replace cracked glass in an oversized geometric window: $650-$1,400, with impact-rated glass pushing the higher end.
• Full custom geometric unit replacement, framed and installed: $1,200-$1,900 for most residential openings, more for true floor-to-ceiling or multi-panel configurations.
• Hardware replacement on a geometric awning or casement: $180-$450 including the part and labor.

What moves the price: glass type, frame condition, whether the opening has shifted, and whether we’re matching an existing finish or replacing a whole unit. You’ll get the number in writing before we start, and the price on the quote is the price on the bill. Call (754) 310-3589 to schedule a free estimate.

Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for ECO Window Systems Work

We’re an independent ECO Window Systems service provider, which means we answer to you, not a brand rep. We’ve been serving Fort Lauderdale and surrounding communities for years, and our crew has handled everything from barrier replacements in Flagler Village townhouses to full impact-unit retrofits on properties closer to the Intracoastal.

Every job carries the 90-Day Done Right Promise: if it’s not done right, we make it right, with no paperwork fights and no arguing. Our technicians are background-checked and uniformed, and a live person answers the phone 24 hours a day, seven days a week. When an ECO Window Systems product is beyond saving, we quote PGT, CGI, CWS, and ES Windows side by side on paper, so you never have to guess what the alternative costs.

Over 42 years of community service runs through this company, and Dale Kessler’s founding rule still governs the shop: measure twice, spec it right, and put it in writing - the frame does not forgive shortcuts.

FAQs