Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Windows & Doors in Hollywood, FL | TruePane Windows & Doors
We provide independent CWS windows and doors service across Hollywood, from Hollywood Hills to the beach corridor, and we also install Impact Windows - Hollywood properties need to withstand hurricane season. We’re not a CWS dealer and we’re not authorized by the manufacturer, which is exactly why our repair calls happen fast: we tell you what’s fixable and what isn’t, without warranty politics in the middle. The one thing that makes our CWS work different here is the Hollywood-specific reality we plan for on every job: salt-air corrosion and Miami-Dade NOA rules that turn a simple glazing change into a code decision. If you’ve got a CWS window or door acting up, call (754) 310-3589 and describe what you’re seeing. We’ll tell you straight whether it’s worth a service call.
Why Hollywood Residents Choose Us for CWS Service
TruePane was founded in 2008 by Dale Kessler, a second-generation glazier who learned the trade in his father’s Columbus, Ohio glass shop before spending two decades setting frames and cutting lites one job at a time. Dale still reads a home’s existing framing before quoting anything, which is why our CWS repair work in Hollywood skews heavily toward keeping good frames in service rather than selling full replacements. We know the CWS product line: how the Series 7700 horizontal roller interlocks behave after years of salt exposure, where the Series 7800 sliding door track gaskets fail first, and which OEM parts are worth the wait versus which aftermarket stainless hardware actually outperforms the original. Background-checked, uniformed technicians do the work, and a live person answers the phone at (754) 310-3589 whenever you call. That’s not a scripted line. It’s how we’ve run the business for years.
Common CWS Windows & Doors Problems We Solve in Hollywood
Hollywood’s Atlantic-facing position punishes window and door hardware faster than inland Broward counties. These are the CWS failure patterns we see most often:
- Interlocking rail seals separating at the meeting stile on CWS horizontal rollers. When east winds push rain off the Atlantic, air and water find the gap. We replace the interlock seal with CWS OEM material so the two sashes close flush and test quiet again.
- Aluminum frame pitting and white oxidation blooming at sill corners. Persistent salt aerosol, especially within a mile of the Intracoastal, eats through the anodized layer. We’ll tell you whether the frame still has structural life or whether it’s time for an NOA-compliant replacement.
- Roller trucks binding or dropping as plastic wheels deform from UV and heat. CWS sliders get sticky or leave a gap at the head when the carriages go. We swap in stainless-steel aftermarket rollers that hold up better than the originals under Hollywood sun.
- Warped or brittle awning vent jamb liners on older Series 7700 units. The liner warps, the sash misaligns, and the latch strike stops engaging. We source the right liner and reset the sash so the lock actually catches.
- Fogged glass units on non-impact CWS windows from the 1970s and 1980s. Many Hollywood CBS ranch homes still have original single-pane or early double-pane CWS units that predate any NOA requirement. We’ll quote glass replacement honestly, including the code truth if the opening is better served by a full upgrade.
CWS Service in Hollywood: What Local Conditions Mean for Your Equipment
Here’s the rule most Hollywood homeowners don’t know until an inspector or insurer lays it on them: Hollywood falls entirely within Florida’s High Velocity Hurricane Zone, the same HVHZ shared only with Miami-Dade County. That means every replacement window and door must carry a Miami-Dade Notice of Acceptance. It also means something more specific for CWS owners: even a repair that changes the glazing on an impact-rated CWS unit must itself be covered by a valid Miami-Dade NOA. You cannot cut generic impact glass on-site and call it good. We keep NOA-specific CWS replacement sash and lens assemblies rather than field-fabricating glass, because a no-permit re-glaze on an impact unit is exactly the kind of thing a Hollywood building inspector will red-tag. In neighborhoods like Hollywood Hills and Emerald Hills, where original jalousie windows and single-pane aluminum sliders fill the 1950s to 1970s CBS ranch stock, that distinction decides whether a repair actually closes out or becomes a second bill. We’d rather tell you upfront.
CWS Models & Products We Service in Hollywood
We service the CWS product families Hollywood homes actually carry: the Series 7700 Impact Horizontal Roller, Series 7900 Impact Casement, Series 7100 Single and Double Hung, and the Series 7800 Impact Sliding Glass Door. Where structural integrity or impact rating is at stake, we install OEM CWS glazing beads, interlock seals, and roller assemblies. For non-impact or cosmetic components, we use vetted aftermarket stainless-steel hardware and high-durometer EPDM weatherstripping, because in Hollywood’s salt air, some aftermarket parts simply last longer than the originals. Our trucks carry the CWS-specific hardware and glazing we need to return most existing windows and doors to service the same day. For a bigger picture on the CWS line and what we can do across model years, see our CWS sales & service page.
CWS Service Pricing in Hollywood
CWS service pricing in Hollywood depends on what failed and what the salt has done to the frame. A roller truck swap or interlock seal replacement runs on the lower end. A full sash replacement with NOA-compliant CWS glazing lands higher, especially if the original unit predates current code. Here’s a straight picture:
- CWS roller/hardware repair: typically $110 to $260 per panel, depending on parts and access.
- CWS interlock seal replacement: typically $180 to $320 per window, including resetting the sash for a flush close.
- CWS track or lower gasket replacement: typically $140 to $290, depending on frame condition.
- CWS sash or glazing replacement with NOA-compliant units: typically $340 to $780 per opening; full frames run higher.
- Full CWS impact window or sliding door replacement: quoted per opening after we measure and check the existing frame and NOA requirements.
If the frame has salt-driven pitting through the anodized layer or the unit pre-dates current NOA requirements, repair often costs 60 to 70 percent of replacement. We’ll tell you that directly, because spending repair money on a frame that won’t pass inspection is a waste. Call (754) 310-3589 for a free estimate. We quote on paper, side by side, so you see exactly what you’re buying.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Hollywood
A glazing change on an impact-rated CWS unit in Hollywood’s HVHZ requires the replacement glass itself to carry a valid Miami-Dade NOA. You cannot cut generic impact glass on-site and remain compliant. We keep NOA-specific CWS replacement sash and lens assemblies for this reason, and we handle the paperwork so the repair doesn’t become an inspection problem later. Call (754) 310-3589 if you need an NOA-compliant CWS glazing quote.
Usually, yes. Constant salt aerosol within a mile of the Broadwalk accelerates oxidation on aluminum frames and corrodes the roller housings and track hardware. The door binds because the carriages are failing, not because the track is dirty. We swap in stainless-steel aftermarket rollers and reset the track gasket, which solves the stiffness without a full door replacement. Call (754) 310-3589 and we’ll figure out what’s actually gone wrong.
The interlock is the vertical seam where the two sashes meet, and it’s the first thing east-wind rain hits. In Hollywood, that’s the Broadwalk-facing elevation of the house. Salt makes the seal brittle, the seal loses contact, water wicks into the track, and the roller housings corrode from the inside. We replace the interlock with CWS OEM seal and address the wet-track damage before it spreads.
Probably not, and we’ll tell you that before you spend a dollar. If the house still has functioning jalousie windows, the opening you’re repairing isn’t part of a sealed, impact-rated envelope anyway. You’re better off putting that money toward an NOA-compliant CWS replacement for the openings that matter most. We’ll quote both so you can decide with numbers in front of you. Call (754) 310-3589 for an honest comparison.
After the Surfside collapse, Florida’s structural inspection and reserve-funding mandates now force many Hollywood Beach mid-rise and high-rise condos to replace original windows and doors that haven’t been significantly upgraded since construction. If your building’s inspection flagged CWS common-area windows or sliding doors, the deadline is real and the replacement standard is NOA-compliant. We handle multi-unit CWS replacement projects through our Window Installation in Hollywood service and coordinate with your association’s engineer and property manager. Call (754) 310-3589 and we’ll come look at the building’s CWS openings.
Service Areas Near Hollywood
We run CWS service throughout Hollywood and the surrounding South Broward corridor. If you’re in Fort Lauderdale, we handle CWS work there too, including full-frame impact retrofits on older CBS builds. Our CWS service area also reaches Pembroke Pines and Miramar. For more on our broader footprint, see our Hollywood service area page. We also offer dedicated CWS service in Pembroke Pines and CWS service in Fort Lauderdale.
Book Your CWS Service in Hollywood Today
If your CWS window is binding, leaking, or showing salt damage, call (754) 310-3589. We’ll ask what you’re seeing, give you a straight answer, and schedule a service call. Estimates are free, and most CWS repairs in Hollywood wrap up in one visit. Call now.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hollywood and South Florida since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After