CWS Impact Windows Nationwide | TruePane Windows & Doors

CWS Impact Windows in Fort Lauderdale: What to Know First

We install, replace, and service CWS impact windows throughout Fort Lauderdale as an independent CWS service provider. Most CWS repairs are completed in a single visit, and full replacements typically run two to three weeks from signed quote to final inspection, depending on the series and glass package. We quote CWS work honestly and up front, with both the parts and the labor in writing before work begins, so there’s no surprise line item when the bill arrives.

Call (754) 310-3589

This page is for homeowners who already own CWS impact windows or are considering them, particularly folks in older Fort Lauderdale homes where coastal exposure and salt air have done their work over the years. If you have a CWS unit that’s fogged, binding, leaking, or not latching after a storm, call (754) 310-3589 and a live person will answer.

Key Takeaways

• We service and install CWS impact windows across Fort Lauderdale, backed by a 90-Day Done Right Promise that we put in writing.
• Most CWS window repairs happen in a single visit, with the part in the truck before we arrive.
• You’ll get a written line-item quote before any work starts, so there are no surprises on the bill.
• We register both manufacturer warranty layers in writing before our truck leaves your driveway.

How CWS Products Fail - and How We Fix Them

CWS impact windows are solid units, but no window made is immune to coastal Florida wear. We’ve worked on enough CWS installations across Fort Lauderdale to know where they tend to give way, and most of it traces back to two things: salt exposure and installation shortcuts that predate the current homeowner.

• Fogged or hazy glass in CWS 9500 series units. The insulated glass seals on early 9500 series windows can break down after years of thermal cycling and salt-laden air, letting moisture into the space between the panes. Once that seal goes, the window loses its insulating value and you’re looking through a fogged lite. We remove the sash, measure the glass pack, and order a replacement IGU matched to the original impact rating, then reseat the sash with new glazing bead.
• Roller and track wear on CWS sliding windows and doors. CWS slider rollers are built to carry weight, but sand and salt grit that work into the bottom track can grind the rollers down over time, especially in homes near the Intracoastal. When a CWS slider starts dragging or jumping off the track, the fix is usually new rollers and a cleaned, realigned track, not a full replacement. We carry and can source CWS-compatible roller assemblies so the job doesn’t stretch into a second visit.
• Warped or corroded frame corners on early CWS aluminum lines. Aluminum frames hold up better than most in hurricane country, but unpainted or scratched corners exposed to salt spray can develop corrosion that spreads into the corner joint. If the corner has eaten through, we’ll replace the frame section or the entire unit depending on how far it’s gone, and we’ll tell you which one the job actually needs before we quote it.
• Latching failure on CWS casement impact windows. The multi-point lock hardware on CWS casements can drift out of alignment as the framing settles, which leaves the window closed but not truly sealed. That’s a problem on impact-rated windows because the latching points are part of the storm protection. We realign the sash, adjust the locking points, and verify the seal with a feeler gauge so the window locks like it’s supposed to.
• Water staining at the bottom corners of CWS fixed and picture windows. This one usually isn’t the window’s fault. We see it in Fort Lauderdale homes where weep holes were blocked during an old caulking job or where the original flashing was never lapped correctly. Water pools, sits, and eventually finds its way inside. We pull the exterior stops, clear or recut the weep system, and reflash where needed so the window drains the way the factory intended.

Our CWS Impact Windows Process

We follow the same sequence on every CWS job, whether it’s a single fogged sash in Victoria Park or a full retrofit in Rio Vista. It’s simple because we don’t skip steps.

1. 1
   You call, we listen. A live person answers the phone at (754) 310-3589 and walks through what you’re seeing. We’ll usually ask for the age of the windows and whether you know the model series.
2. 2
   We measure and assess on site. A background-checked, uniformed technician comes out, measures every opening twice, and reads the existing framing before quoting anything. On CWS units we’ll check the glass etching to confirm the impact rating and date of manufacture.
3. 3
   You get a written quote with the parts decision spelled out. If the job needs a part, we’ll tell you whether the OEM part is worth the wait or a quality aftermarket equivalent will do the same job, and we’ll stand behind either one. The quote is line-item and fixed.
4. 4
   We do the work clean. The technician arrives when we said, lays down protection, removes the sash or the full unit, and installs the replacement properly, shimmed and squared to the rough opening.
5. 5
   We test the window before we leave. The sash locks, the slider rolls, the casement seals, and the glass sits true in the frame. If it’s not done right, it’s not done.
6. 6
   You get the warranty paperwork. Both manufacturer warranty layers are registered in writing before our truck leaves the driveway, and our 90-Day Done Right Promise covers the workmanship. No fine print, no phone tag, no arguing.

What CWS Impact Windows Costs in Fort Lauderdale

We’re not the cheapest bid in the room, and we won’t pretend to be. What we’ll give you is a square deal: a written price that covers the work correctly the first time, with no change orders or surprise line items when the job’s done.

What moves the price is the glass package, the frame finish, the size of the opening, and how much of the old framing is still sound. We’ll walk you through it line by line and register every warranty layer before we leave. Call us at (754) 310-3589 for a free estimate on your specific project.

Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for CWS Work

We’ve been serving Fort Lauderdale and the surrounding communities for years, and we plan to be here in thirty more. That’s not a slogan. It’s how we run the business. Dale Kessler grew up in his father’s glass shop in Columbus, Ohio, measuring rough openings and cutting lites before he could drive. He trained at Columbus State Community College’s building trades program, then spent two decades putting that education to work one frame at a time. When we quote a CWS job, Dale reads the existing framing first; a habit that keeps our installations clean and our callbacks rare.

We stand behind every CWS job with the 90-Day Done Right Promise, and both manufacturer warranty layers are registered in writing before the truck leaves the driveway. If you’re considering CWS alongside other lines, we’re an authorized installer for PGT, CGI, ES Windows, and ECO Window Systems as well, so we’ll quote the options side by side on paper without pushing one brand over another. We hire local, train our apprentices into journeymen, and answer the phone 24 hours a day with a real person. If the pane is not true, the job is not done.

FAQs