Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Energy-Efficient Windows in Fort Lauderdale: What to Know First
CGI energy-efficient window repair and replacement in Fort Lauderdale typically runs $180-$380 for a glass unit swap and $900-$2,400 for a full window replacement, with most jobs completed in a single visit. TruePane Windows & Doors is an independent CGI service provider, not a CGI dealer, which means we repair what’s failed rather than steering you toward a full replacement when a seal or balance is the real culprit.
This page is for homeowners who own CGI windows, want the energy performance back, and don’t want to gamble on a contractor who’s never touched a CGI frame. If that’s you, call (754) 310-3589 and ask for a free estimate.
How CGI Products Fail - and How We Fix Them
- Fogged glass on CGI Estate Collection units. The Estate line uses insulated laminated glass, and when the perimeter seal lets go, moisture creeps between the lites and clouds the view while the inert gas escapes. On Fort Lauderdale homes where morning humidity sits at 80 percent before breakfast, a compromised seal shows up as condensation between panes, not just on them. We replace the failed IGU with a matching low-E unit and re-glaze the sash rather than replacing the whole frame, which preserves the original CGI geometry and keeps the job under $400 in most cases.
- Warped or bowed sashes on CGI Estate Collection casements. Aluminum frame systems in direct afternoon sun on the west side of Fort Lauderdale can develop slight bowing over fifteen to twenty years. A bowed sash breaks the weatherstripping’s compression, so the window leaks conditioned air even when it’s shut and locked. We check rail straightness when we measure, and when we find bow beyond spec, we replace the sash through the aftermarket network rather than forcing a new frame into an opening that doesn’t need it.
- Failed balances on CGI Estate Collection single hungs. Older balance systems lose tension progressively, so the sash sags an inch on the left while the right side still holds. You feel the drag when you lift the window, and eventually the sash won’t stay put. We replace balances as a pair on every job, calibrate to the sash weight, and test the window ten cycles before we call it done.
- Leaking frame corners on CGI Sentinel horizontal rollers. The Sentinel series uses a multi-chamber aluminum extrusion, and when the corner gaskets dry out from salt air near the Intracoastal, driving rain gets pulled into the track and shows up as a wet sill after storms. We pull the fixed panel, inspect the weep system, replace the corner gaskets, and run a controlled water test before reinstalling. It’s a common enough failure that we keep gasket stock in the shop, so there’s no wait for parts.
- Hazing on CGI Estate Collection insulated units. Some batches of insulated laminated glass from the mid-2000s developed a fine interior haze that isn’t condensation, just gradual film breakdown between the laminate and the glass. It’s mostly cosmetic, but it cuts visible light transmission and makes the window look dirty from the inside. We offer replacement IGUs with a newer laminate interlayer that carries better UV-blocking performance than the original spec - worth knowing if fading on your furniture has been the quiet evidence all along.
Our CGI Energy-Efficient Windows Process
Here’s how a CGI job runs through our shop, from first call to final cleanup:
- 1
We answer the phone. A live person takes your call at (754) 310-3589, asks what the window is doing, and schedules a time that works for you. No call centers, no callbacks.
- 2
We inspect the opening. Dale Kessler or one of our background-checked techs comes to the house, measures the opening twice, and reads the frame condition before quoting. We check for bow, check the weatherstripping, and identify whether the failure is glass, seal, balance, or frame.
- 3
We quote on paper, side by side. You see the OEM option and the quality aftermarket option next to each other, with part numbers and durations stated in writing. No verbal numbers, no surprises later.
- 4
We do the work in one visit. Most CGI glass and balance replacements happen the same appointment. We carry common CGI profiles in the shop, and what we don’t carry, we order before we arrive.
- 5
We test and confirm. We run the window through its full range of motion, check the seal with a moisture meter, and verify the lock engages without force.
- 6
We register the warranty layers before we leave. Both manufacturer layers are registered in writing, durations stated, under The Keystone Standard. The truck doesn’t leave the driveway until that paperwork is done.
What CGI Energy-Efficient Windows Costs in Fort Lauderdale
Here’s what CGI energy-efficient window work runs for common scenarios in Fort Lauderdale:
- Fogged IGU replacement (single window): $180-$380
- Balance replacement (pair, installed): $140-$220
- Corner gasket and weep service: $120-$200
- Full CGI window replacement (installed): $900-$2,400 per opening
- Sash replacement (aftermarket): $350-$750 per sash
The price moves on frame size, glass package, and whether we’re matching an existing color finish or going custom. What doesn’t move is the quote: we write it down, we stand behind it, and there are no change orders hiding at the end. Call (754) 310-3589 for a free estimate on your specific windows.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been serving Fort Lauderdale and the surrounding communities for years, and the bulk of our CGI calls come from homeowners who already spent good money once and don’t want to do it again through a different company. The 90-Day Done Right Promise covers the workmanship, in writing, with no arguing and no fine print that falls short. The Keystone Standard puts both warranty layers on paper before we pull out of the driveway. And because we’re an authorized installer for more than a dozen manufacturer lines - including PGT, CWS, ES Windows, and ECO Window Systems - we can quote your CGI repair next to the alternatives without any sales pressure to switch brands. If the pane is not true, the job is not done. That’s the standard, and it applies to every CGI window we touch.
FAQs
Yes. As an independent CGI service provider, we use OEM parts or specification-matched aftermarket parts that preserve what’s left of your manufacturer coverage. If the original warranty is still active, we tell you before we start what’s covered and what isn’t. Call (754) 310-3589 and we’ll walk through the specifics of your window’s serial number.
CGI frames are built for coastal conditions and routinely last twenty to thirty years in Fort Lauderdale. The glass seals and balances are the parts that fail first, usually at the ten-to-fifteen-year mark, and those are serviceable without replacing the whole window. If your windows are fogged or the sashes are dragging, it’s very possibly a repair, not a replacement.
We do both, and we’ve learned that most energy-efficiency complaints on CGI windows trace to a failed seal, a worn balance, or broken weatherstripping - all repairable. We only recommend replacement when the frame itself is compromised or the owner wants to step up to a different glass package. The repair route is usually under $400 per opening, which matters when you’re looking at ten windows.
Most CGI seal and balance repairs are completed within three to five business days of your call, and the work itself is done in a single visit. We keep common CGI glass profiles and balance systems in local stock, so we don’t roll up with a clipboard and a promise to come back next month.
Yes. A two-story Fort Lauderdale house with four or five failed seals loses measurable air-conditioned air through those windows, and the humidity gets in even when the air doesn’t. When we replace a failed IGU with a properly sealed low-E unit, owners routinely notice their AC runs less on the west-facing rooms. It’s not magic, just glass doing the job it was built for.
If you own CGI windows in Fort Lauderdale and they’re not performing, call TruePane Windows & Doors at (754) 310-3589 for a free estimate. We’ll measure twice, spec it right, and put it in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.