Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterEntry Doors in Fort Lauderdale, FL | TruePane Windows & Doors
Entry doors take more abuse than any other opening in a South Florida home. Sun, salt air, afternoon thunderstorms, and the occasional hurricane threat all land on that one door first. TruePane Windows & Doors installs Therma-Tru fiberglass and steel entry systems engineered for exactly this climate, with impact-rated glass options that hold up to High-Velocity Hurricane Zone requirements without looking like a fortress. We’ve installed these doors across Fort Lauderdale, from Rio Vista to Victoria Park to Coral Ridge, and we know what a difference a properly set HVHZ-rated door makes. Call (754) 310-3589 to talk through your entry door options and schedule a free on-site measurement.
Product Overview - Entry Doors
The Entry Doors Impact Series brings together two things that don’t usually share a sentence: hurricane-code performance and genuine curb appeal. These are Therma-Tru fiberglass and steel entry door systems built to carry an impact rating, so you’re not choosing between a door that protects the house and one you actually want to look at every day.
Fiberglass is the workhorse here. It doesn’t warp, swell, or rot the way wood does in Fort Lauderdale humidity, and it takes a factory finish extremely well. Steel brings its own advantages where maximum structural stiffness matters, particularly on wider openings. Both frame materials are engineered around the impact glass package, so the door, frame, and glazing perform as one system rather than as parts bolted together.
These doors suit the architectural range you see across Fort Lauderdale. The paint-grade woodgrain option reads as traditional on a 1950s ranch in Poinsettia Heights. A clean black or bronze finish steps up a contemporary build in Sailboat Bend. And the decorative impact glass inserts let a Mediterranean-style home in Las Olas Isles keep its character without sacrificing code compliance. Factory-finished options ship ready to install and needing nothing more than hardware, while paint-grade doors let you match an existing trim color exactly.
Technical Specifications
Here’s what the Entry Doors Impact Series offers in terms of build, glazing, finish, and sizing. Everything below is verified per configuration on your final quote, because the right combination depends on your opening, your wind zone, and your design intent.
- Frame materials: Fiberglass or steel, selected by size, exposure, and finish preference.
- Maximum size: Up to 48 inches wide. Wider openings call for a door-and-sidelite configuration, which we handle regularly in Fort Lauderdale remodels.
- Glass options: Decorative impact glass insert, Low-E insulated glass insert, or no glass with a solid panel.
- Finish options: White, black, bronze, or a paintable woodgrain finish that takes site-mixed paint cleanly.
- Impact glazing: Laminated glass with a PVB interlayer on glazed configurations, matched to the frame system.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers issued per configuration and included with your permit submittal.
Hurricane & Compliance Performance
Laminated Impact Glass. Glass inserts use a PVB (polyvinyl butyral) interlayer that holds the glass in the frame under impact. Even if the outer lite cracks, the membrane keeps the opening sealed, which is the entire point in a storm. It also stays put against forced entry between storms.
Miami-Dade NOA and Florida Product Approval. Every configuration carries a Notice of Acceptance and Florida Product Approval number issued for that specific build. These numbers are what Fort Lauderdale permit reviewers look for, and we include them with your submittal. Exact numbers come with your specific quote, because they vary by size and glass package.
FBC High-Velocity Hurricane Zone Compliance. The system is engineered to Florida Building Code HVHZ requirements. That’s the stricter of the two Florida wind codes and the one that governs Fort Lauderdale, where coastal exposure changes the calculation. Not every entry door sold in Florida meets HVHZ; this one does.
TAS 201, 202, and 203 Testing Context. HVHZ-rated doors earn their approval through a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. In plain terms: the door gets hit, then pushed by changing wind pressure thousands of times, then pried at. It has to survive all three.
Design Pressure Matched to Your Wind Zone. Design pressures are matched to your specific wind zone, up to +/-100 PSF, and never higher. We don’t oversell a rating your home doesn’t need, and we don’t guess. The number on your quote reflects your actual wind zone calculation, verified against the NOA documentation.
Low-E and Insulated Glass Options. For doors that get direct afternoon sun, a Low-E insulated glass insert cuts solar heat gain through the glass without changing the door’s impact rating. It’s a sensible pairing on west-facing entries in Fort Lauderdale, where heat load is a real consideration.
Color & Glass Options
The finish you pick does more than set a color. It determines how the door ages, how it reads from the street, and how much maintenance it asks for over the years.
White and bronze are the two we order most often in Fort Lauderdale. White suits the clean coastal palette you see from Harbor Beach to Coral Ridge and reflects heat well on doors that face open sky. Bronze carries a kind of quiet formality that lands well on Mediterranean and Spanish-influenced homes, and it hides salt film better than lighter colors between cleanings. Black is bolder and works beautifully on modern builds with dark window frames. The paintable woodgrain finish is for anyone matching an existing stain or paint scheme, whether that’s a historic cottage in Sailboat Bend or an HOA-controlled townhome with a strict palette.
Glass selection is just as practical. A decorative impact insert adds light and architecture without giving up the rating. Low-E insulated glass manages heat gain and gives a clearer view than decorative patterns. A solid panel door with no glass is the best choice where privacy, security, or direct western exposure matters most. We’ll walk through the trade-offs on your specific entry.
Installation by TruePane Windows & Doors in Fort Lauderdale
An impact-rated entry door is only as good as its installation. The NOA number describes how the product performs when installed correctly, and incorrectly set doors fail in ways the test protocol never sees: racked frames, binding hardware, gaps in the perimeter seal, and water intrusion that eats the rough opening from the inside out.
Our installation practice follows AAMA 2400/2410 standards. Every door is set level, plumb, and square before anchoring, because a door set a quarter-inch out of square will never seal correctly along the sweep. We use AAMA 812 low-expansion foam perimeter sealant around the entire frame, which fills the gap between the jamb and the rough opening without bowing the frame. After the door is anchored and sealed, we run a water test on the threshold and lower corners, check the hardware swing and latching, and verify the sweep contact.
Fort Lauderdale adds its own layer. Coastal exposure means salt in the air and a higher wind zone than inland Broward. Permitting in HVHZ jurisdictions requires the right NOA and Florida Product Approval numbers matched to your exact configuration, and we prepare that documentation as part of the job. If your home sits in a flood zone, we’ll flag any elevation or threshold considerations before you order. You want a door that opens five years from now the way it opens today. That comes down to installation.
Frequently Asked Questions - Entry Doors
Design pressure is matched to your specific wind zone, up to +/-100 PSF, and never higher. Your exact rating depends on the size, glass package, and exposure of your opening, and we verify it against the NOA documentation before you order. Call (754) 310-3589 and we’ll run the calculation for your address.
Lead time depends on the finish, glass package, and size. Factory-finished doors with standard decorative glass move quickly, while custom paint-grade configurations with specialized inserts take longer. We’ll give you a firm delivery window when we write your quote, and we coordinate installation to follow delivery by days, not weeks.
In Fort Lauderdale, yes. HVHZ jurisdictions require the Notice of Acceptance and Florida Product Approval numbers submitted with the permit application, and they must match the exact configuration you’re installing. We pull those documents for your specific door and include them with the permit package. Estimates for a new entry door include this paperwork.
Within the system’s tested range, up to 48 inches wide. Beyond that, we configure a door with sidelites or a double-door setup, each with its own NOA documentation. Glass, finish, and hardware prep are all chosen per order. If you’re working from architectural plans, bring them to the first measurement and we’ll spec the exact opening.
Fiberglass and steel frames need little beyond regular cleaning with mild soap and water, particularly closer to the salt air along Fort Lauderdale’s barrier island. We recommend checking the weatherstripping and sweep contact twice a year and keeping the threshold track free of sand and debris. If the finish ever needs touching up, paint-grade doors take site-mixed paint directly.
Get a Quote - Entry Doors in Fort Lauderdale
The right entry door starts with a measurement, a wind zone calculation, and an honest conversation about what you want the door to do. We’ll bring samples, check your rough opening, and write a line-item quote with the correct NOA documentation for your configuration. Call (754) 310-3589 to schedule a free on-site measurement and get your project started.
Written by the team at TruePane Windows & Doors, serving Fort Lauderdale and greater Broward County with hurricane-impact window and door installations.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
