Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCasement Windows in Fort Lauderdale, FL | TruePane Windows & Doors
Casement windows are side-hinged, crank-operated windows that swing outward like a door. In Fort Lauderdale, where wind-driven rain and hurricane season shape every material decision, these windows earn their keep with a full compression seal that closes tight against the frame. Homeowners choose impact-rated casements when they want real ventilation, a clean line of sight, and a window that locks down airtight when the weather turns. TruePane Windows & Doors has installed casement windows across Fort Lauderdale for years, on homes from Rio Vista to Coral Ridge, and we treat every opening as part of a larger system: level, plumb, square, and sealed to perform. Call (754) 310-3589 to talk through your project.
Product Overview - Casement Windows
Casement windows are the workhorse of the impact window category in South Florida. Because the sash closes against a continuous compression seal, there’s no sliding track to rattle under wind load and no gap for driving rain to find. That matters in Fort Lauderdale, where afternoon thunderstorms arrive sideways and October storms test every opening in the house.
The design is simple: a single sash, hinged on one side, opened with a crank. Crank-operated hardware lets you open the window outward without pushing on the glass, and the sash stays open at whatever angle you set. That outward position actually catches breeze and funnels it into the room when the wind is light, which makes casements a favorite in Fort Lauderdale bedrooms and kitchens where natural airflow matters.
TruePane Windows & Doors offers casement windows in aluminum and vinyl frames. Aluminum carries the slender sightlines that suit mid-century and contemporary Fort Lauderdale homes. Vinyl provides thermal breaks and a warmer touch, which homeowners often prefer in coastal Mediterranean and ranch-style houses. Both frames are built here for one job: holding impact-rated laminated glass in place when a storm throws a direct hit.
We install casement windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so the frame profile, hardware finish, and glazing package can match the rest of the home.
Technical Specifications
- Frame materials: Aluminum or vinyl, selected by line and project requirements.
- Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, clear glass.
- Finish options: White, almond, bronze, black, tan.
- Screen options: Fixed screen or retractable screen.
- Operation: Side-hinged, crank-operated, outward-swinging sash with full compression seal.
- Design pressure: Matched to your wind zone, up to +/-100 PSF, never higher.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration. Engineered to Florida Building Code High-Velocity Hurricane Zone requirements.
- Installation practice: AAMA 2400/2410 standard practice, AAMA 812 low-expansion foam perimeter sealant, level and plumb setting.
Sizes are per-opening. Since casements hinge on one side, we recommend keeping sash widths reasonable so the hardware and hinges carry the glass without strain over 20 years of Fort Lauderdale salt air.
Hurricane & Compliance Performance
Laminated Impact Glass
A PVB (polyvinyl butyral) interlayer is sandwiched between two panes of glass. When debris strikes during a hurricane, the glass may crack but the interlayer holds the broken pieces in the frame, so the window opening stays protected and the house does not pressurize.
Miami-Dade NOA / Florida Product Approval
Each casement configuration is issued a Miami-Dade Notice of Acceptance or Florida Product Approval number. These are per-configuration documents, so the exact number for your frame size and glass package gets verified on your specific quote, not pulled from a generic list.
FBC / HVHZ Compliance
These casement windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. For Fort Lauderdale, which sits inside the HVHZ, that means the design, the anchoring, and the installation all answer to the strictest wind codes in the country.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact. TAS 202 applies cyclic wind-pressure loading that simulates the repeated gusts of a real storm, not a single push. TAS 203 tests forced-entry resistance. Any product bearing an NOA for this market has passed through that protocol sequence.
Design Pressure for Your Wind Zone
Design pressure is the amount of force, measured in pounds per square foot, that the window is rated to withstand. We match design pressure to your actual wind zone, up to +/-100 PSF, and we do not sell a stronger rating than the location requires. Over-specifying is a waste of money; under-specifying is a failure waiting for a storm.
Energy Performance
Low-E and insulated glass options are available for the casement line. In Fort Lauderdale, Low-E keeps a meaningful slice of solar heat out of east- and west-facing rooms, which is where most casements get placed to catch cross-breeze. The energy choice comes down to the room orientation and how much direct sun the opening takes.
Color & Glass Options
Casement window finish options include white, almond, bronze, black, and tan. White and almond read as traditional Florida and disappear against lighter stucco walls, which covers a large portion of Fort Lauderdale’s housing stock. Bronze and black bring a sharper edge to modern coastal builds and homes with dark roof lines or black-framed impact entry doors. Tan sits well on Mediterranean and Key West style homes where the exterior palette runs warm.
On the glass side, clear impact glass gives you the most natural light and a true view, which matters when the window faces a canal or the Intracoastal. Laminated impact glass with Low-E coating balances storm protection with heat control, and tinted glass cuts glare in rooms that get blasted by afternoon sun from the west. Insulated impact packages pair the PVB interlayer with an air space for additional thermal separation, which is worth considering for bedrooms that run hot in August.
Installation by TruePane Windows & Doors in Fort Lauderdale
An impact casement window is only as good as the opening around it. The NOA rating applies to the complete installed assembly, and if the frame is out of square, the anchors are wrong, or the perimeter seal fails, the engineered system no longer performs as tested. That’s why TruePane Windows & Doors handles installation as part of the product, not an afterthought.
Every Fort Lauderdale install starts with a pre-installation inspection of the rough opening. We check the buck, the condition of the surrounding framing, and the existing waterproofing before the window ever comes off the truck. The new unit goes in level, plumb, and square, set on shims where needed and anchored per the approved product drawings for your specific configuration.
We seal the perimeter with AAMA 812 low-expansion foam and apply the exterior sealant detail per AAMA 2400/2410 standard practice. Then we run a final water test on the opening before trimming out and cleaning up. Fort Lauderdale sits in the HVHZ, and many neighborhoods here require permit submittals with the NOA or Florida Product Approval numbers attached. We know that process well. If a window leaks in Fort Lauderdale, you will find it in the first real afternoon storm, so we treat every opening as if it faces the ocean, because many of them do.
Frequently Asked Questions - Casement Windows
Design pressure is matched to your specific wind zone and property conditions, up to +/-100 PSF, never higher. The exact rating your opening needs gets calculated from your permit drawings and site location, not guessed from a map. Call (754) 310-3589 and we will run the numbers for your address.
Lead time depends on the manufacturer line, the frame material, the glass package, and the finish color. A standard white aluminum casement ships faster than a black vinyl unit with Low-E insulated impact glass. Once we have your sizes and options selected, we give you a ship date in writing before you sign. Call (754) 310-3589 for current timing on the configuration you want.
Yes. Fort Lauderdale is in the High-Velocity Hurricane Zone, and the building department will require the NOA or Florida Product Approval documentation for your exact casement configuration as part of the permit package. TruePane Windows & Doors pulls the submittal documents for your windows and attaches them to the permit application, so the review desk gets the right approval numbers the first time. Call (754) 310-3589 if you need the submittal for windows you already bought.
Casement windows are built to the opening, which means width and height are per-project measurements, not stock sizes. You can also combine casements with fixed picture windows to create a larger glass wall while keeping the operable venting on the ends. We will walk you through what works structurally before the order goes in. Call (754) 310-3589 to talk through your opening sizes.
Keep the tracks, hinges, and crank mechanism clean, and lubricate the moving hardware once or twice a year with a product made for window hardware. Salt air in Fort Lauderdale is rough on exposed metal, so rinse exterior frame surfaces occasionally if you live within a few blocks of the ocean. If the crank starts to feel tight, get it checked before the hardware strips. Call (754) 310-3589 and we will take a look.
Get a Quote - Casement Windows in Fort Lauderdale
Ready to see what casement windows cost for your home? We start every project with a free on-site measurement, then give you line-item pricing with the NOA compliance paperwork matched to your permit application. Call (754) 310-3589 today to schedule your free estimate, or ask any question about the impact casement line.
Written by the team at TruePane Windows & Doors, serving Fort Lauderdale, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
