Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Shingle, Tile & Metal Roofing in Fort Lauderdale: What to Know First
PGT shingle, tile, and metal roofing in Fort Lauderdale is work we take on as an independent PGT service provider, and most repairs are completed in a single visit once parts are on hand. We quote upfront by the job, not by a vague hourly guess, and our pricing reflects the coastal reality of South Florida: salt air, wind-driven rain, and the specific ways PGT units respond to both. If you own PGT roofing products in Fort Lauderdale and something is binding, leaking, or failing to close with authority, call us at (754) 310-3589. This page is for homeowners who would rather pay for the fix once than explain it twice.
Key Takeaways
- We service PGT shingle, tile, and metal roofing across Fort Lauderdale, including barrier-facing and Intracoastal properties.
- Most PGT roofing failures we see are installation-related, not manufacturing defects. That changes how we quote and how we fix.
- Every job carries the 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves your driveway.
- We are independent. We are not a PGT dealer and we do not pretend to be. Our loyalty is to the homeowner, not to a factory line sheet.
How PGT Products Fail - and How We Fix Them
In Fort Lauderdale, PGT shingle, tile, and metal roofing fails in predictable ways. Here are the five we see most often, with the actual cause behind each and how we correct it.
- PGT WinGuard vinyl frames pulling loose at the corner gaskets. The WinGuard line was built for coastal impact requirements, but the corner seals on older units harden under constant UV exposure. Water does not pour in on day one. It wicks, slowly, staining the drywall three years later. We replace the gasket, reset the corner, and verify the weep system drains before we call the job done.
- PGT Architectural Series shingle-over-metal retrofit hardware corroding at the mounting flange. Homes within two miles of the Intracoastal have air salt content that eats standard fasteners in five to seven years. We see this on the PGT Architectural Series units bolted into older wood framing. The fix is not a bigger screw. It is marine-grade stainless hardware, sized for the original rough opening, and a shim plan that keeps the unit true.
- Sagging tile roof transition flashings where PGT units were not tied back into the original roof membrane. PGT doors and windows set under barrel tile rooflines need kickout flashing that channels water past the frame. When that flashing is missing or undersized, the leak shows up at the head of the unit, not at the sill. We pull the first course of tile, install a proper stepped flashing, and retest with a hose before we reset anything.
- PGT sliding glass doors on metal roof overhangs binding mid-track in the summer heat. Metal roofs move. So does an aluminum PGT slider, just at a different rate. When the overhead structure expands in July, the track can pinch by an eighth of an inch, and the door starts to fight you. We realign the under-track support, grind only where the manufacturer permits, and reset the rollers with the weight of the panel carried properly.
- Failed internal glazing beads on older PGT impact units letting sheets of rain onto the sill line. The outward appearance looks fine, but the interior bead has compressed, and once wind pressure hits 40 miles an hour, water breaches the channel. We restore the captured glazing with the correct durometer bead and sealant approved for PGT pressure requirements. Silicone alone will not hold. It needs the mechanical bite.
Our PGT Shingle, Tile & Metal Roofing Process
We have a set way of doing a PGT roofing job in Fort Lauderdale, and it starts before we quote. Dale Kessler, our owner, reads the existing framing before he ever puts a number on paper. That habit keeps callbacks rare.
- 1
Call and inspection. You call (754) 310-3589. A live person answers. We schedule a time, show up, and measure every opening twice. We do not guess from photos.
- 2
Written diagnosis and line-item quote. We tell you exactly what failed, why it failed, and what it costs to fix. No surprise add-ons. No “we found more once we opened it up” unless there is genuinely something hidden, and then we call you before touching it.
- 3
Parts decision. Where PGT OEM parts are available and the right call, we use them. Where a quality aftermarket component outperforms OEM at a fairer price, we show you both on paper and let you decide. We never hide the difference.
- 4
The repair itself. Uniformed, background-checked technicians do the work. Shoe covers go on. Drop cloths go down. The old hardware comes out, the new goes in, and the opening gets sealed to match the surrounding roof system, whether that is shingle, tile, or standing seam metal.
- 5
Test and cleanup. We hose-test where water intrusion is the concern. We cycle sliding and swing units and adjust until the movement is clean. Then we clean up the way we would leave our own mother’s house.
- 6
Paperwork before we leave. Both manufacturer warranty layers are registered in writing, with durations stated, before the truck pulls away. That is The Keystone Standard. If it is not done right inside 90 days, we make it right. No paperwork fights.
What PGT Shingle, Tile & Metal Roofing Costs in Fort Lauderdale
PGT shingle, tile, and metal roofing repairs in Fort Lauderdale run on a wide range because the roof system and the failure mode dictate the labor. Here is what we see on typical jobs:
- Corner gasket replacement on WinGuard units: $175-$320 per unit, depending on access and the number of corners.
- Flashing repair under barrel tile at a PGT door or window head: $480-$900, including resetting tile courses and water testing.
- Slider realignment on a PGT sliding glass door under a metal roof overhang: $250-$450, if the track and rollers are salvageable.
- Full hardware upgrade to marine-grade stainless on multiple Architectural Series units: $900-$2,200, depending on opening count and framing condition.
- Full PGT unit replacement with shingle, tile, or metal roof integration: quoted per project, never per vague square foot.
What moves the price is roof access, tile type, the age of the original installation, and whether the underlying framing is sound. We quote fixed prices. The number we write is the number you pay. Call (754) 310-3589 to schedule your free estimate.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for PGT Work
We have been serving Fort Lauderdale and its surrounding communities for years, and the reason homeowners stay with us is simple: we stand behind the work in writing. Every PGT job carries the 90-Day Done Right Promise. If the pane is not true, the job is not done. That is the founding rule Dale Kessler keeps on the whiteboard, and it governs every install we touch.
Our technicians know PGT construction details because we have repaired enough of them to know where they fail, from Flagler Village townhouse barrier replacements to full impact retrofits closer to the Intracoastal. When a PGT unit is beyond sensible repair, we quote side by side against other manufacturer lines we service: CGI, CWS, ES Windows, and ECO Window Systems. You see the difference on paper, in writing, before you decide. A live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a regional call center. Call (754) 310-3589.
FAQs
If you use an unapproved aftermarket part or a non-rated sealant, yes, it can. We only use components and materials that meet PGT’s published pressure and drainage requirements, and we register both warranty layers in writing before we leave. We are an independent PGT service provider, not a factory representative, so our first job is protecting your coverage, not selling you a service you do not need. Call (754) 310-3589 for an exact answer on your specific model.
Most common PGT gaskets, rollers, and stainless hardware sets are available to us within a few business days in Fort Lauderdale. Rare or discontinued series-specific extrusions can take two to three weeks. We will tell you the wait honestly before you commit. If the failure is a safety or water-intrusion issue, we can often stabilize the unit as a temporary measure while parts arrive. Call (754) 310-3589 and we will give you a real timeline, not a sales answer.
If the frame is square, the glass is intact, and the issue is hardware, gaskets, or flashing, repair usually makes sense. If the frame itself has corroded through at the sill or the glazing has lost its structural bite, replacement is the honest call. We will show you the numbers for both and let you decide. Our bias is toward repair when it will actually hold. Estimates are free.
When the scope requires a permit in Fort Lauderdale, we pull it, and we have the work inspected before we call it closed. Replacement of impact-rated openings and roof-system tie-ins frequently require permitting. We handle that end of the job so you do not have to spend your mornings at the building department. Ask us during the estimate and we will tell you exactly what applies to your property.
Only if we find a hidden condition that no reasonable inspection could have detected, and only after you approve the change in writing first. The number we quote is the number you pay. That is what a square deal means around here. If you have had a contractor pad the bill mid-job before, you are the reason we put it in writing every time. Call (754) 310-3589 to schedule your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.