PGT Sliding Glass & Patio Doors Nationwide | TruePane Windows & Doors

PGT Sliding Glass & Patio Doors in Fort Lauderdale: What to Know First

We repair and replace PGT sliding glass and patio doors throughout Fort Lauderdale as an independent PGT service provider. Most PGT door repairs in this area run between $225 and $1,400 depending on whether you’re dealing with a roller swap, a track adjustment, or a full panel replacement, and the majority of jobs are completed in one visit. If you own a PGT door that’s hard to slide, fogged between the panes, or leaking during a summer downpour, you’ll want to know exactly what you’re dealing with before anyone touches it. This page is written for PGT owners who plan to stay in their house and want the door fixed right the first time. Call (754) 310-3589 and a live person answers, day or night.

Call (754) 310-3589

Dale Kessler founded TruePane Windows & Doors in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. What that means for your PGT door is simple. We measure the opening twice, we quote the work in writing, and we register both warranty layers before the truck leaves your driveway.

How PGT Products Fail - and How We Fix Them

PGT builds a solid door, but Fort Lauderdale has a way of finding the weak points. Here are the failures we see most often, series by series, and how we handle them:

• PGT WinGuard sliding doors: roller flat-spotting from salt air and sand. WinGuard is PGT’s aluminum impact line, common in homes east of US-1. The factory rollers are nylon, and after years of salt and fine sand working into the track, they develop flat spots. You’ll feel a bump every 18 to 24 inches as the panel moves. We replace them with stainless-steel wheel rollers and clean the track channel, not just the visible surface. Sand hides in the bottom groove and eats new rollers within months if it’s not removed.
• PGT 5500 Series patio doors: top-hung panel sag that drags on the sill. We see this a lot in older Fort Lauderdale ranch homes where the slab has settled. The top rail was never designed to carry the full panel weight indefinitely, and once the header shifts a fraction of an inch, the door starts dragging. The fix is not cranking the adjuster screw until it strips. We relevel the panel, replace the carrier if it’s worn, and re-shim the frame so the door carries its weight the way it was designed to.
• PGT SpectraGuard and Eze-Breeze sliding panels: brittle vinyl tracks after years of UV exposure. These lines are popular for porches and enclosed lanais. The vinyl track looks fine until the day it doesn’t. Fort Lauderdale sun degrades the plasticizer, and the track cracks under the panel weight. We replace with upgraded track stock that holds up longer in direct coastal sun, then set the panel so it rides evenly across all wheels.
• PGT WinGuard impact doors: worn interlock weatherstripping causing wind whistle and wet sills. The interlock is where the two sliding panels meet. The weatherstripping there is a consumable. Once it compresses, you get a whistle during storms and water working its way under the sill track. We replace with a compression gasket matched to the WinGuard profile, not a generic strip. A door that seals properly is part of the impact rating working the way PGT intended.
• PGT 2500/3500 series: handle and mortise lock failures from daily use. The handle mechanism on these aluminum frames has internal springs and pawls that eventually give out. When the inside handle stops engaging the lock, the door won’t latch. We replace the full mortise assembly with a PGT-spec unit rather than patching the old one. Half a lock is still a broken lock in a tropical storm.

Our PGT Sliding Glass & Patio Doors Process

Every PGT job follows the same sequence, whether it’s a roller replacement or a full panel swap. Here’s what happens from your first call:

1. 1
   You call (754) 310-3589. A live person answers, asks what the door is doing, and schedules the visit.
2. 2
   We inspect and diagnose. A uniformed, background-checked technician measures the opening, checks the panel alignment, and identifies exactly what failed. We quote the repair in writing before any work begins.
3. 3
   Parts decision. Where the door’s warranty is still active, we use OEM PGT parts so the warranty stays intact. Where it’s not, we walk you through the trade-off between OEM and quality aftermarket components and put the recommendation on paper.
4. 4
   The repair itself. We set the panel, adjust the rollers, replace what needs replacing, and test the lock, the seal, and the glide. Most jobs are completed the same visit.
5. 5
   The test. The door has to slide with one hand and latch without force. If anything is off, we fix it before we leave.
6. 6
   The paper. Both manufacturer warranty layers get registered in writing, and your 90-Day Done Right Promise starts that day. Done right means done right on the first visit, and if it’s not, we come back and make it right without arguing.

What PGT Sliding Glass & Patio Doors Costs in Fort Lauderdale

Here are honest ranges for the PGT door work we do most often in Fort Lauderdale. These are starting points, not bids. The exact number depends on your door’s series, panel count, and condition:

• Roller replacement on a PGT sliding door: $225 to $425 per panel, including cleaning the track channel and adjusting alignment.
• Track repair or re-leveling: $300 to $650, depending on how far the frame has shifted and whether the slab needs shim work.
• Interlock weatherstripping replacement: $180 to $350, materials included, matched to the WinGuard or 5500 profile.
• Handle and mortise lock replacement: $150 to $325, parts and labor.
• Full panel replacement (impact-rated): $1,200 to $2,800 per panel, glazing and hardware included, with a written line-item quote.

What moves the price is panel size, whether the glass is impact-rated, and what’s hiding once we pull the door off the track. You’ll always get a fixed quote before work starts, and the quote we write is the price you pay. Call (754) 310-3589 to schedule a free estimate.

Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for PGT Work

We’ve been serving Fort Lauderdale and the surrounding communities for over 42 years through a craft tradition that started in a small Ohio glass shop and came south with Dale Kessler. We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, ES Windows, and ECO Window Systems. That matters for you because when a PGT door is beyond saving and a replacement is the honest call, we can quote alternatives side by side on paper so you see exactly what you’re buying and what it costs. Every job carries our 90-Day Done Right Promise and The Keystone Standard. A live person answers the phone 24 hours a day, 7 days a week. We’re here in thirty years or we’re not the company we claim to be.

FAQs