Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWhy Fort Lauderdale Homeowners Choose ES Windows Windows & Doors
We’re an independent Es Windows in Fort Lauderdale service provider, and we repair, maintain, and install aluminum impact-rated window systems across the city every week. If you own a home or condo with ES Windows 6700, 7700, or 8700 series units, we know exactly how they fail in this climate: salt-corroded rollers on sliding panels, cracked thermal breaks on older frames, and interlocking meeting rails that start leaking after a few hurricane seasons. We’re not factory-authorized by ES Windows, and we won’t pretend otherwise. What we are is a local glazing company with over 42 years of combined craft experience that opens up your unit, diagnoses the actual problem, and fixes it with parts rated for Broward County’s salt air, not whatever ships cheapest from a warehouse in Ohio. Call (754) 310-3589 to talk through what your windows are doing.
Why Trust TruePane Windows & Doors for Your ES Windows Windows & Doors?
Dale Kessler grew up in his father’s glass shop in Columbus, Ohio, where a rough opening got measured twice before anyone picked up a cutting wheel. That habit stuck. Before we quote any Es Windows in Hollywood or Fort Lauderdale repair, we pull the sash, check the track condition, and read how the frame was set into the opening. That’s how we catch things other companies miss, like a 7700 series 3-panel slider whose center panel has been grinding on sand-packed tandem rollers for months, wearing a groove into the bottom track that a simple roller swap won’t fix.
Our technicians work on ES Windows aluminum systems regularly. We know which series use which roller assemblies, which meeting rail profiles tend to deform after pressure cycling, and which hardware fails first within two blocks of the Intracoastal versus ten blocks inland. We carry OEM ES Windows components for structural and impact-rated parts, and we substitute marine-grade stainless for wear items like rollers, handles, and weatherstripping when the original spec simply does not hold up in Fort Lauderdale’s humidity. Every job gets written up with the warranty layers registered in writing before our truck leaves your driveway. That’s the Keystone Standard, and we’ve applied it on every single job since the company was founded in 2008.
Common ES Windows Windows & Doors Problems We Fix in Fort Lauderdale
- Seized or grinding rollers on 3-panel sliders (7700 and 8700 series). The tandem roller assemblies on ES Windows 3-lite sliders are the first thing to go in Fort Lauderdale. Sand and canal salt work their way into the roller bearings, the grease breaks down, and the panel starts dragging instead of gliding. If you keep forcing it, the roller housings score the stainless track and the panel starts jumping the rail. We replace the roller cartridges with marine-grade stainless assemblies and realign the track before it turns into a panel replacement.
- Deformed interlocking meeting rails on double hung impact units. After repeated storm-driven pressure cycles, the interlocking check rail on ES Windows impact double hungs can deform just enough to break the seal between sashes. Air leaks at the meeting rail, water follows during driving rain, and the unit stops performing to its HVHZ rating. We can often re-profile the rail and replace the weatherstripping to restore the seal, if the frame itself is still straight.
- Cracked thermal breaks on older 6700 series frames. The 6700 series is a non-impact line that’s still in plenty of Fort Lauderdale homes, and its thermal breaks were never designed for two decades of Florida UV. When the polyamide strut between the interior and exterior aluminum cracks, you get condensation on the inside frame rail and a window that’s losing energy efficiency. This is a repair-versus-replace call: once the thermal break fails, the frame is compromised and we typically recommend replacement rather than a patch job.
- Stripped or corroded casement and awning locking points. ES Windows casement and awning units use multi-point locking systems. Near the ocean or the canals, the locking hardware corrodes faster than the rest of the window. The handle turns, the gears spin, but the lock points don’t engage. We replace the hardware with stainless options and re-time the lock mechanism so it seats properly against the frame.
- Glass seal failure showing as interior fog. Fort Lauderdale’s humidity averages above 75 percent year-round, and seal failure on an ES Windows insulated glass unit shows up as fog you can’t wipe off. On impact-rated units, we replace the glazing with ES Windows-certified laminated impact glass. On non-impact units, we quote both repair and replacement so you can make an honest cost call.
ES Windows Parts & Our Repair-vs-Replace Approach
We use genuine ES Windows hardware and glazing for anything structural or impact-related: laminated glass, interlocking meeting rails, frame extrusions, and multi-point lock mechanisms. For wear items like rollers, handles, and weatherstripping, we source marine-grade stainless steel and high-durometer EPDM replacements that outlast the factory parts in Fort Lauderdale’s salt environment. That’s a deliberate choice, made after watching standard rollers seize on canal-front properties within two years of installation.
We recommend repair whenever the frame is sound and the glass is intact. A $400 roller replacement on a 7700 series slider makes more sense than a $4,000 panel swap. But we won’t bandage a unit with a failed thermal break or a compromised impact rating. Those get replaced, because a window that doesn’t meet HVHZ code is a liability, not just an inconvenience. Call (754) 310-3589 and we’ll tell you which side of that line your windows are on.
Our ES Windows Service Process - Step by Step
1. Diagnosis. We open the window, remove the sash if needed, and inspect the rollers, track, meeting rails, thermal breaks, and lock points. We identify the series (4700, 6700, 7700, 8700) and confirm whether the unit is impact-rated.
2. Quote. We put the repair or replacement scope on paper, with part numbers and line-item pricing. You see exactly what you’re paying for before we start.
3. Repair or install. We use OEM parts for structural components and marine-grade stainless for wear items. Every opening gets measured twice before we cut or order anything. Measure twice, spec it right, and put it in writing - the frame does not forgive shortcuts.
4. Testing. After repair or installation, we run the window through its full range of motion, check the seal integrity, and test the locks. On impact units, we verify the panel seats correctly against the header and sill.
5. Warranty registration. We register both manufacturer warranty layers in writing and confirm the durations with you before our truck leaves. Our 90-Day Done Right Promise covers the workmanship on every job.
ES Windows Products We Service & Install in Fort Lauderdale
We service and install the full ES Windows lineup for Impact Windows services: the 7700 Series Impact Aluminum Window, the 8700 Series Impact Aluminum Window, the 6700 Series Non-Impact Aluminum Window, and the 4700 Series Aluminum Single-Hung. That includes horizontal rollers, sliding impact windows, 3-panel sliders, casement windows, awning windows, and fixed picture units.
We stock ES Windows-compatible rollers, handles, lock points, weatherstripping, and track components locally so most wear-item repairs don’t wait on a parts shipment. For glass replacements on impact units, we order ES Windows-certified laminated glazing directly and schedule the install once it arrives.
We Also Service These Brands
Es Windows in Pembroke Pines and Fort Lauderdale is a big part of our work, but we’re not tied to one manufacturer. We service and install PGT, CGI, CWS, and ECO Window Systems as well. That matters when you’re comparing replacement options, because we’ll quote your ES Windows repair honestly and, if replacement makes more sense, we’ll show you side-by-side numbers on other impact-rated lines without pushing you toward a single brand.
FAQs - ES Windows Windows & Doors Service in Fort Lauderdale
The tandem rollers under the center panel have likely packed with sand or corroded from canal salt. Once the bearings seize, the panel drags on the track instead of rolling. We replace the rollers with marine-grade stainless assemblies and realign the track. Call (754) 310-3589 for a diagnosis before the track gets scored.
In most cases, the glass can be replaced without swapping the whole sash. We remove the glazing bead, extract the failed insulated glass unit, and install new ES Windows-certified laminated impact glass. The exception is when the frame itself is compromised. We’ll tell you which applies after we open the unit up.
The crank mechanism has likely stripped or the locking points are corroded and not releasing. We replace the operator hardware and re-time the multi-point locks so the window opens and closes smoothly. It’s a common repair on canal-front condos in Fort Lauderdale, and it’s usually resolved the same day.
You’ll see condensation forming on the interior aluminum frame, not between the glass panes. That means the polyamide thermal break inside the frame has cracked, and warm humid air is hitting cold aluminum. On older 6700 series units, a failed thermal break is not repairable in the field. Replacement is the honest call. We’ll quote it against repair so you can decide with real numbers.
Yes. We perform warranty-eligible repairs as an independent provider, and we document everything for your manufacturer claim. We’re not factory-authorized by ES Windows, but we know the product lines well enough to complete repairs that the manufacturer’s warranty will accept. We’ll register the paperwork in writing before we leave.
Roller and track repairs on ES Windows sliders typically run $250 to $650 per panel depending on the series and the extent of track damage. Glass replacement on impact units runs higher, and full replacements are quoted per opening because opening sizes vary so much across Fort Lauderdale’s CBS construction. Every quote is line-itemed on paper with no change orders. Call (754) 310-3589 for an exact number on your windows.
Book Your ES Windows Service in Fort Lauderdale, FL
If your ES Windows are grinding, leaking, fogging, or spinning handles without engaging, call us at (754) 310-3589. We’ll diagnose the problem and give you a written quote that says exactly what we’ll do and what it costs. Free estimates, no surprises, and a live person answers the phone.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.