Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Roof Repair Across Fort Lauderdale
Roof repair in Fort Lauderdale runs anywhere from $450 for a small flashing fix to $4,800 or more for structural work on a canal-front home, and the single biggest variable is salt. Fort Lauderdale’s 300-plus miles of interior waterways push corrosive air into neighborhoods that are miles from the beach, so fasteners, flashing, and underlayment that hold up fine in Davie or Sunrise fail here within three years. At TruePane Windows & Doors, we spec materials for that salt reality from the first estimate, because a repair that ignores it just becomes a second repair in 24 months. We serve every Fort Lauderdale neighborhood from Coral Ridge to Rio Vista to Progresso. Call (754) 310-3589 for a free, written estimate with no pressure and no fine print.
Why TruePane Windows & Doors Is Fort Lauderdale’s Preferred Roof Repair Company
We are not a franchise that sends a rotating crew from a call center two counties away. TruePane Windows & Doors was founded by second-generation glazier Dale Kessler in 2008, and our Roof Repair team works Fort Lauderdale as local crews should: we know this city’s housing stock, we know its wind zone, and we know what the canals do to metal. When we walk a 1950s CBS ranch in Coral Ridge or a 1970s two-story in Rio Vista, we are looking for the same failure points we have corrected in hundreds of Fort Lauderdale homes: galvanized fasteners rusting at the underlayment, flashing joints opening to wind-driven rain, and window frames pitting from salt-laden air that travels miles inland.
Every Fort Lauderdale job is covered by our 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing before our truck leaves your driveway, with durations stated on paper. That means no paperwork fights, no arguing about what was promised. A live person answers our phone 24 hours a day, 7 days a week. You will never reach a voicemail tree when you call (754) 310-3589. If we tell you we will be there at 8 a.m. on Tuesday, we will be there at 8 a.m. on Tuesday, uniformed and background-checked, with a plan for your specific roof repair.
Our Roof Repair Services in Fort Lauderdale
Impact-Rated Window and Door Installation with Marine-Grade Hardware
This is where a roof repair in Fort Lauderdale often starts: the flashing joint where your roof meets a window or door frame has opened because the frame oxidized, the seal failed, and the anchor backing has corroded. We install impact-rated PGT and CGI frames with stainless or hot-dip galvanized hardware as the baseline, not an upsell. In Fort Lauderdale’s High Velocity Hurricane Zone, that is not an aesthetic choice. It is what keeps wind-driven water out of your wall cavity.

HVHZ-Compliant Flashing and Anchor Retrofits for CBS Masonry
Most Fort Lauderdale homes are concrete block structure. That changes how flashing gets anchored. A pressure-treated buck must be set into the masonry opening, and the anchor spacing has to meet Broward County HVHZ requirements, which are stricter than almost anywhere else in the country. Our crew measures every opening twice and sets flashing joints with sealed, marine-rated materials that hold against the salt air coming off the canals.

Roof-to-Wall Flashing Repair and Replacement
The joint where a roof plane meets a vertical wall is where Fort Lauderdale water problems usually begin. Salt air accelerates metal fatigue on flashing, and after a few hurricane seasons, the metal pulls away just enough to let wind-driven rain behind it. We remove the old flashing, inspect the underlayment for rot and rust, and reset the entire junction with hot-dip galvanized or stainless steel, sealed properly at every lap.

Underlayment and Fastener Replacement for Salt-Exposed Roofs
On older Fort Lauderdale homes, especially 1950s and 1960s CBS ranches in Lauderdale Manors and Progresso, we frequently find galvanized roofing nails that have rusted through inside two to three years. They loosen. The underlayment lifts. Water gets under shingles or tile and finds a way in. We replace those fasteners with hot-dip galvanized or stainless, re-secure the underlayment, and give you a repair that is built for the air this city actually has.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Lauderdale
For Fort Lauderdale’s salt-exposed conditions, we work most often with PGT, CGI, and ES Windows. These manufacturers produce impact-rated frames and glass that carry Florida Product Approval numbers specific to the HVHZ, and their hardware options include the stainless and marine-grade components that survive canal air. We are an authorized installer for more than a dozen manufacturer lines, and we quote them side by side on paper so you can see exactly what you are buying and why one costs more than another. If a local Fort Lauderdale home needs a specific configuration, we can usually have it measured, ordered, and installed in as fast as a single day once the units arrive. Custom fabrication runs 4 to 6 weeks.
Common Roof Repair Problems We See in Fort Lauderdale Homes
- Galvanized fasteners failing at the underlayment. Fort Lauderdale’s interior canals push salt-laden air miles inland, and standard galvanized nails or screws on roof edges and flashing joints corrode and loosen within 24 to 36 months. Once they loosen, the underlayment lifts and wind-driven rain gets underneath.
- Oxidized window and door frames breaking roof flashing seals. Aluminum frames pit and oxidize in this air, which weakens the seal where the frame meets roof flashing. Once that seal opens, water follows the gap into the wall cavity and shows up as a ceiling stain two floors down.
- Seized sliding glass door rollers on canal-front streets. In neighborhoods like Rio Vista, Las Olas Isles, and Coral Ridge Isles, standard aluminum rollers and tracks seize or corrode within two to three years. Canal salt exposure rivals oceanfront conditions, so we spec stainless steel hardware for any door near water.
- Rusted railing bases and unsealed paver joints wicking salt water. We see deck and roof-edge railing bases that have rusted through because the joint was never sealed against salt water wicking up from below. The repair is straightforward: remove, inspect the structural connection, and reset with sealed, marine-grade hardware that will not rust out in a few seasons.
Pricing for Roof Repair in Fort Lauderdale, FL
Here are real anchors for the Fort Lauderdale market. A small flashing repair on a single-story CBS home in Progresso runs $450 to $900. Replacing a roof-to-wall flashing junction with marine-grade stainless hardware runs $1,200 to $2,800 depending on linear feet and access. A full underlayment and fastener replacement on a 1,500-square-foot salt-exposed roof runs $3,000 to $4,800. If the repair involves replacing a window or door frame where it meets the roof, impact-rated units from PGT or CGI generally run $800 to $1,500 per opening installed, with single-hung impact windows at $900 to $1,800 and large custom openings at $2,500 to $5,000. Whole-home packages in Fort Lauderdale range from $8,000 to $25,000 or more. What moves the price: opening count, floor height, wind zone design pressures (Fort Lauderdale’s projects are routinely specified at 170 mph wind speeds or higher), and whether you choose coastal-spec stainless hardware or standard galvanized. We recommend coastal-spec every time. The cheap spec costs more within a decade. Call (754) 310-3589 for a free in-home measure and a written quote with all numbers in front of you.
What Roof Repair Costs in Fort Lauderdale
The price of any repair here is set by three things: how much salt exposure the area gets, what the opening or flashing must withstand under Broward County’s HVHZ code, and what the original installer used back when the house was built. In Coral Ridge and Rio Vista, where canal air is heavier, we price with stainless hardware and marine-grade sealants because anything less will not survive. In Progresso and Lauderdale Manors, the salt is less intense but still present, and the concrete block structure means every flashing anchor has to be set into buck framing with HVHZ-compliant spacing. We do not give ballpark numbers over the phone and then change them after we see the job. We come out, measure the openings and the flashing runs, and give you a written line-item quote before any work starts. Call (754) 310-3589 to schedule your free estimate.
Florida Pays You Back
Fort Lauderdale homeowners who add impact-rated windows and doors, or who repair their roof-to-wall flashing and underlayment as part of a wind-mitigation upgrade, can stack several incentives. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation improvements. Florida also exempts impact-resistant windows and doors from state sales tax. On the federal side, the 25C energy credit returns 30% of product cost, up to $600 per year, on qualifying units. And once a wind-mitigation inspection ($75 to $150) documents the improvements, many carriers reduce the windstorm portion of the premium by about 25% on average. We cannot guarantee what your insurance carrier or the state will approve, because programs and carriers set the final numbers. But we can show you exactly which upgrades qualify and how to document them properly. Our team has done this for Fort Lauderdale homeowners many times. The process is not complicated once someone explains it straight.
We Also Serve Cities Near Fort Lauderdale
Our crews work throughout Broward County, including Plantation, Pompano Beach, Hollywood, and Coconut Creek. If you are in one of those cities and need Roof Repair in Fort Lauderdale but want a crew that knows the whole area, call us. We serve the entire Fort Lauderdale metro with the same 90-Day Done Right Promise and The Keystone Standard on every job.
Serving Fort Lauderdale, FL - Our Local Coverage Area
We’re based in the Fort Lauderdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Roof Repair in Fort Lauderdale
Because the canals themselves generate salt-laden air, and that air moves inland far beyond the beachfront. Standard aluminum frames oxidize and pit within a few years in this environment, which breaks the seal to your roof flashing and lets water in. Marine-grade finishes and stainless hardware are the only spec that holds up. Call (754) 310-3589 and we will show you the difference on paper before you spend a dollar.
Fort Lauderdale sits inside Broward County’s High Velocity Hurricane Zone, a designation shared only with Miami-Dade County in all of Florida. That means stricter anchor and installation protocols, and combined with canal-driven salt air, standard galvanized fasteners corrode and loosen within 24 to 36 months. Palm Beach County homes do not face the same HVHZ requirements or the same salt exposure from interior canals. We use hot-dip galvanized or stainless steel fasteners on every repair, which is what the environment demands. Call (754) 310-3589 for an exact quote, and the estimate is free.
No. In Fort Lauderdale, every permitted replacement window and door must carry HVHZ Florida Product Approval. Non-impact-rated units are not permittable for replacement projects here, unlike most of the U.S. where impact glass is an upgrade option. This is not a regional preference; it is code. If a contractor offers you a non-impact unit for a Fort Lauderdale replacement, walk away and call (754) 310-3589 instead. We will give you a straight answer and a written quote.
Those neighborhoods sit on canal water, and the salt exposure rivals oceanfront conditions. Standard aluminum rollers and tracks corrode within two to three years. We spec stainless steel hardware for any door near water in Fort Lauderdale, and we set the threshold and flashing so the door drains properly instead of holding salt water against the track. If your door is already seizing, we can replace the hardware and get it sliding clean again. Call (754) 310-3589 for a free estimate.
Salt air accelerates oxidation on the frame and the flashing, which breaks the seal where they meet. Once that seal opens, wind-driven rain follows the gap into the wall cavity, and the first sign is usually a ceiling stain somewhere below. The fix is coastal-spec: marine-grade sealant, stainless or hot-dip galvanized hardware, and a flashing profile that sheds water instead of trapping it. We do this repair regularly in Fort Lauderdale, and we stand behind it with our 90-Day Done Right Promise. Call (754) 310-3589 to schedule a free in-home look.
Get Your Free Fort Lauderdale Roof Repair Estimate
If you live in Fort Lauderdale and you are seeing stains, loose flashing, or a roof edge that is starting to pull away, do not wait for the next storm to finish what the salt started. Call TruePane Windows & Doors at (754) 310-3589. We will schedule a free in-home measure, walk your roof and flashing with you, and give you a written quote with real numbers, the exact materials we will use, and a straight answer on warranty coverage. A live person answers 24 hours a day. We will be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Lauderdale with a craft standard built over more than four decades of glazing and roofing work.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After