Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Margate
Door installation in Margate, FL means working inside the strictest wind code in the country. Every exterior door here must carry a Miami-Dade Notice of Acceptance or an HVHZ Florida Product Approval to pass inspection. TruePane Windows & Doors has been installing, replacing, and weather-sealing doors in Margate’s 1960s-era CBS ranch homes long enough to know which products pass on the first try and which ones the building official will reject. Call (754) 310-3589 for a free in-home measure and a written quote.
Why TruePane Windows & Doors Is Margate’s Preferred Door Installation Company
Margate homeowners call us because we know what the HVHZ inspector looks for before we ever pull the permit. Dale Kessler, our founder, is a second-generation glazier who has built TruePane around one rule: if the pane is not true, the job is not done. That rule applies to every door jamb we set, every NOA we match to the opening, and every warranty we register in writing before the truck leaves your driveway.
Our background-checked, uniformed technicians measure every opening twice and quote manufacturer lines side by side on paper. We do not send a salesman. We send a tradesperson who can explain why a specific door carries a design pressure rating of DP 60 and why that matters on a canal-front home near Lake Margate or a ranch on the western side of the city. Over four decades of local craft work has taught us what Margate’s housing stock needs, and we hire local, train apprentices into journeymen, and answer the phone like a company that plans to be here in thirty years.
Our Door Installation Services in Margate
Hurricane-Proof Front & Entry Doors
Margate sits entirely within Broward County’s High Velocity Hurricane Zone. A front door that is not impact-rated will fail a wind mitigation inspection and leave real money on the table. We install impact-rated entry doors from PGT, CGI, and ES Windows, each with a Miami-Dade NOA matched to the specific model and size. That documentation is what your insurer needs to apply the windstorm premium credit, and we handle the permit sign-off alongside the install.
Replacement Doors
Most of the original doors in Margate’s late-1950s through mid-1980s CBS ranch homes were aluminum frame units that have corroded in the salt-laden air and swollen in the humidity. We pull the old frame, flash the rough opening to HVHZ detail, and set a new reinforced jamb and sill before hanging the replacement unit. This is a full frame-out job, not a slab swap. A slab swap leaves the same rotted jamb and the same non-compliant wind rating in place.
Storm & Exterior Doors
A storm door on a Margate home has to do two jobs at once: shed afternoon downpours and meet the same wind-borne debris requirement as the primary door behind it. We install exterior and storm doors with design pressure ratings that match the opening’s wind zone, and we verify the adjacent jalousie windows are not undermining the wind-load path. That last check is the one that trips up most projects here, and it is exactly what our Door Installation team looks for on every measure visit.
French & Double Doors
French doors on a Margate ranch open onto a patio and catch the full force of afternoon thunderstorms off the Everglades. The threshold, the astragal, and the multi-point locking hardware all need to be rated with the door. We hang double doors with insulated-glass units and laminated interlayer, then flash the sill so water runs out instead of under the jamb. If the pane is not true, the job is not done, and a French door that binds in July is not true.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Margate
We are an authorized installer for more than a dozen manufacturer lines, including CGI, CWS, and ES Windows. That matters in Margate because the building official wants to see the NOA certificate for the exact model and size listed on the permit application. We keep the approval paperwork organized by configuration and have the laminated interlayer and impact-rated hardware in stock for the most common Margate openings. Fast turnaround means you are not waiting on a part from a distribution center two states away.
Common Door Installation Problems We See in Margate Homes
- Corroded aluminum frames on original 1960s and 70s doors. The humidity and salt air in Margate eats the finish, then the metal. By the time the door sticks, the frame is usually pitted and the seal is long gone.
- Jalousie windows in the same wind-load path. Margate’s earliest neighborhoods near the Pompano Beach side still have louvered jalousie windows in secondary bedrooms and bathrooms. They cannot be retrofitted to code, and they can void the insurance credit on a door replacement if not addressed in the same permit scope.
- Door installed with a Florida Product Approval but no Miami-Dade NOA. The HVHZ inspector can reject that at final inspection. We see it on homes where a previous contractor worked from an inland spec sheet instead of the Broward HVHZ requirements.
- Rotting jambs from driven rain. Margate’s storm season pushes water horizontally against the eastern-facing entries on homes along main corridors. A door can look fine from the inside while the jamb behind the weatherstripping is soft. We flash the rough opening properly so that does not happen again.
Pricing for Door Installation in Margate, FL
A single impact-rated entry door in Margate, fully installed with a reinforced jamb, runs $2,500 to $5,000 depending on size, glass package, and design pressure rating. A standard non-impact replacement door starts around $1,200 and climbs with hardware, finish, and any frame repair. French or double door units begin at $3,500 and can reach $7,000 or more when the opening needs full frame-out work. The jalousie window issue is the wild card on older Margate ranches. If the adjacent louvered units must be replaced for the wind mitigation inspection to pass, add $900 to $1,800 per opening. We give you a written line-item quote before any work starts, and our 90-Day Done Right Promise covers the installation. Call (754) 310-3589 to schedule a free in-home measure.
What Door Installation Costs in Margate
Margate’s pricing sits at the upper end of Broward County’s range because the HVHZ requirement removes the cheapest products from the table. Impact windows run $800 to $1,500 per window installed, and an impact single-hung runs $900 to $1,800. Large or custom openings run $2,500 to $5,000. Whole-home packages typically land between $8,000 and $25,000 or more depending on opening count, frame material, and wind zone. Floor height matters too. A second-story opening near a canal sees higher design pressure than a ground-floor opening mid-block. We measure every opening twice and quote the exact NOA-matched product, not a generic lowest-bid line. The free in-home measure and written quote cost you nothing and give you real numbers to compare against any other bid.
Florida Pays You Back
The incentives stack, but the final numbers belong to the programs and the carriers, not to us. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida runs a sales-tax exemption on impact-resistant windows and doors. The federal 25C energy credit returns 30% of the product cost, up to $600 a year on qualifying units. After a wind-mitigation inspection costing $75 to $150, windstorm-premium credits average around 25% on the windstorm portion of the premium. A binder letter from the insurer is the piece of paper that confirms it, and our documentation for every Margate install is organized so your inspector has exactly what they need.
We Also Serve Cities Near Margate
Our Door Installation in Margate coverage extends to the surrounding communities. Homeowners in Coconut Creek, Coral Springs, Pompano Beach, and Plantation call us for the same HVHZ-compliant work, and our crews route to those cities from our South FL dispatch office. You get the same product approvals, the same written quote, and the same 90-Day Done Right Promise.
Serving Margate, FL - Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Margate
In Margate, you need both. The city sits entirely inside Broward County’s High Velocity Hurricane Zone, which requires a Miami-Dade Notice of Acceptance or an HVHZ Florida Product Approval. A product with a general Florida Product Approval but no Miami-Dade NOA will be rejected by the building official at permit inspection. We only install doors that carry the Miami-Dade NOA for the exact model and size listed on the permit. Call (754) 310-3589 for an exact quote, and we will show you the NOA certificate before you sign anything.
No. Margate’s HVHZ code requires the entire door assembly, frame included, to be rated as a unit. The original aluminum frames on 1960s and 70s ranch homes were not built to carry impact-rated glass, and the frame itself often has corrosion and seal failure from decades of South Florida humidity. A glass-only replacement leaves a non-compliant frame in place and fails the wind mitigation inspection. The fix is a full frame-out replacement with a reinforced jamb and sill.
A compliant impact-rated door with a Miami-Dade NOA directly supports wind mitigation credits under Florida Statute 627.0629. The inspector verifies the product approval and design pressure rating against the opening, and that documentation goes to your insurer. Windstorm-premium credits average around 25% on the windstorm portion. We hand you the permit sign-off, the NOA, and the wind mitigation documentation organized in one packet so the inspection moves without back-and-forth.
Yes, in most cases. Jalousie louvered windows cannot be retrofitted to meet the current Florida Building Code wind-load requirements. If they sit in the same wind-load path as the door being replaced, the wind mitigation inspection will flag them and the insurance credit gets held up. We inspect the full opening during the free measure and tell you upfront whether the adjacent jalousie units need to come out. The cost for those replacements lands between $900 and $1,800 per opening depending on size and design pressure.
Margate’s HVHZ wind-borne debris zone requires a design pressure rating matched to the specific opening, typically DP 50 or higher depending on the home’s elevation, location, and exposure. A generic DP 30 door that works for inland Florida will not pass here. We match every door to the opening’s actual wind speed and design pressure requirements, and the NOA certificate confirms the rating on paper. Call (754) 310-3589 and we will measure your opening and tell you exactly which ratings apply.
Contact TruePane Windows & Doors in Margate
If you have an original door that binds in July, a frame that has corroded from salt air, or a jalousie window sitting next to the entry you want to replace, call us. We will send a background-checked, uniformed technician to measure the opening, check the wind-load path, and write you a line-item quote with the NOA-matched products side by side. The estimate is free. The work carries our 90-Day Done Right Promise and The Keystone Standard: both warranty layers registered in writing before the truck leaves your driveway. A live person answers the phone 24 hours a day, 7 days a week. Call (754) 310-3589 today.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Margate and Broward County with a second-generation glazier’s craft tradition.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.