Custom & Geometric Windows in Davie - Free In-Home Measure, Written Price

Fast, Reliable Custom & Geometric Windows Across Davie

Custom and geometric windows in Davie aren’t a catalog order. They’re measured, spec’d, and fabricated for one opening on one house, and in this town the opening often sits on a lot with horses, county inspections, and wind-load requirements most glaziers never see. A true custom geometric window in Davie, FL typically runs $2,500 to $5,000 installed, and the lead time is 4 to 6 weeks for fabrication once we’ve locked the measurements and product approval. Call (754) 310-3589 for an in-home measure and a written quote. We serve every Davie neighborhood from Shenandoah to Sunshine Ranches, and we know which permits will land on your particular parcel before we cut the first opening.

Call (754) 310-3589

Why TruePane Windows & Doors Is Davie’s Preferred Custom & Geometric Windows Company

We’ve spent years working Davie’s particular mix of 1960s ranch homes, equestrian estates, and unincorporated Broward parcels, and that matters when the county’s agricultural zoning overlays change what an inspector will accept. A window ordered to city EDGE standards on one street gets rejected three blocks away because that parcel falls under HVHZ large-missile requirements. We scope that before quoting. Dale Kessler founded this company in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That rule reads differently in Davie, where a custom trapezoid on a 1972 CBS ranch can trigger both an impact mandate and a county outbuilding inspection on the same permit.

Davie homeowners call us because we answer the phone with a live person, 24/7, and because our technicians show up uniformed, background-checked, and prepared to measure every opening twice. The 90-Day Done Right Promise sits behind every install, and The Keystone Standard means both manufacturer warranty layers are registered in writing before the truck leaves your driveway. No paperwork fights, no arguing. We stand behind it.

Our Custom & Geometric Windows Services in Davie

Custom Impact Windows

Davie sits inside Broward County’s High-Velocity Hurricane Zone, so every replacement window must carry a Miami-Dade or Florida Product Approval with HVHZ certification. That’s true even for homes several miles inland from the coast. We spec impact-rated glass with design pressures matched to the opening, never a rating above +/-100 psf, and we install CGI, PGT, and ES Windows lines on Davie homes every week.

Geometric & Shaped Windows

Trapezoids, pentagons, hexagons, triangles. These take real framing work, not a stock unit dropped into a rough opening. On Davie’s older ranch homes we often replace jalousie windows that Brownard permit reviewers flag immediately during any renovation pull. Removing a jalousie and setting a hurricane-rated geometric unit in the same silhouette is one of the most common jobs we do in this town.

Arched & Curved Windows

Arched windows on Davie homes need radius-matched framing and custom jamb extensions, especially when the original opening was built around a single-pane aluminum unit from the 1970s. We build the extension off-site when access is tight, which it often is on rural lots with paddocks and septic setbacks. The result is an arched opening that’s square, plumb, and ready for an inspector who knows exactly what he’s looking at.

Oversized Openings

This is where Davie differs from most suburbs. Equestrian properties and agricultural parcels call for barn-style sliding doors, wide entry gates, and outbuilding picture windows that don’t exist in a standard window catalog. We’ve framed openings for horse barns and tack rooms where the county required a structural wind-mitigation review before we could set the unit. See our full Custom & Geometric Windows service page for details on our fabrication process and product lines.

Trusted Brands We Service in Davie

We install and service CGI, ES Windows, and ECO Window Systems among the manufacturer lines we carry for Davie homeowners. We’re also an authorized installer for more than a dozen lines including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, and ES Windows. When we quote your job, we put the manufacturer options side by side on paper so you see exactly what you’re buying, including the design pressure rating and the warranty terms. We don’t stock every part for every brand, but for the lines we install most often in Davie we keep common hardware and glass-stop profiles on hand, which shortens turnarounds on service calls.

Common Custom & Geometric Windows Problems We See in Davie Homes

• Jalousie glass in a geometric bump-out shattering under storm impact. The original thin frame was never rated for design pressure above 40 psf, and large-missile testing wasn’t part of the original build. We replace the entire assembly, not just the glass.
• Arched windows rejected by Broward County inspectors on agricultural parcels. A homeowner orders a unit to city EDGE standards, but the inspector requires the higher HVHZ large-missile rating because the lot carries an equestrian zoning overlay. We check the parcel zoning before we order anything.
• Delaminating laminated glass in outbuilding picture windows. Ammonia and manure dust from horse barns break down the interlayer within two wet seasons, which voids the Florida Product Approval. We spec interlayers rated for agricultural environments on these jobs.
• Warped frames on oversized geometric units. South Florida humidity and heat cycles pull aluminum frames out of true on large openings, which binds the sash and lets water in. A properly built jamb extension and a square rough opening solve most of it.

Pricing for Custom & Geometric Windows in Davie, FL

What Custom & Geometric Windows Costs in Davie

The figures above are the real anchors. Impact windows run $800 to $1,500 per unit installed, impact single-hung units $900 to $1,800, large or custom openings $2,500 to $5,000, and whole-home packages $8,000 to $25,000 and up. What moves the price in Davie is the combination of opening count, wind zone requirements, floor height, and frame material. A second-story opening costs more to stage and set than a ground-floor one. An agricultural parcel with county review adds permit coordination time. Aluminum frames carry a different price point than vinyl or wood-clad. We don’t guess. We measure every opening twice, quote the manufacturer lines side by side on paper, and give you a fixed price before any work starts. The free in-home measure and written quote is how every Davie job starts.

Florida Pays You Back

There are real incentives on the table for Davie homeowners, and we’ll point you to the right ones. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida also exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit returns 30% of the product cost, up to $600 per year on qualifying units. And after a wind-mitigation inspection, which runs about $75 to $150, many Davie homeowners see windstorm-premium credits averaging around 25% on the windstorm portion of their policy. Programs and carriers set the final numbers, so we’ll never promise a credit amount. We’ll tell you what’s available and let the paperwork speak for itself. Impact windows are permanent protection, not panels you hang when a storm comes. The comparison against shutters matters: shutters protect only when someone is home to deploy them, and they do nothing for heat gain or UV fade on the other 364 days of the year. Impact glass works every day, with no panels to store and no hinges to maintain. We don’t sell shutters. We sell windows that do the job year-round.

How Davie’s Dual Permitting Changes the Job

Davie is the only Broward municipality where a permit for a custom geometric window on a 1960s ranch can simultaneously trigger an HVHZ impact mandate and a county agricultural outbuilding inspection. That happens because roughly half of Davie’s parcels fall under unincorporated Broward code with equestrian zoning overlays, not in-city review. Practically, that means a homeowner off Hiatus Road might pull a city permit, while a homeowner two streets over off Shotgun Road gets a county agricultural review on the same style of window. We check the parcel zoning and the applicable code path before we quote, and we’ve been doing it long enough to know which inspectors look for which details. Same window, same product approval, but the permitting path changes the price and the timeline, and you should know that before you sign anything.

A Job We Won’t Forget

On a 2.1-acre lot off Flamingo Road in the Sunshine Ranches pocket, our crew pulled the original single-pane aluminum trapezoid window from a 1972 CBS ranch and set a hurricane-rated custom trapezoid with a Miami-Dade NOA. The county permit forced a structural wind-mitigation review before we could frame the oversized opening, and we had to run a 160-foot material path around a horse paddock. So we built the jamb extension off-site and staged the crane on the graded driveway apron. The window went in square, the inspection passed, and the homeowner didn’t have to move a fence. That’s the standard on every Davie job, whether it’s a $900 single-hung or a $5,000 custom arch.

We Also Serve Cities Near Davie

TruePane serves Custom & Geometric Windows in Davie and the surrounding communities. Homeowners in Fort Lauderdale, Hollywood, Pembroke Pines, and Miramar call us for the same reason Davie residents do: straightforward pricing, real permits, and a live person on the phone. If you live in one of those cities, we’ll bring the same approach to your opening. Call (754) 310-3589 and we’ll schedule the measure.

FAQs - Custom & Geometric Windows in Davie

Call TruePane for Custom & Geometric Windows in Davie

If you’ve got a jalousie that rattles in every thunderstorm, an arched window that failed inspection, or an equestrian outbuilding that needs real glass, we’ll measure it, quote it, and do the job right. The phone is answered by a live person 24 hours a day, 7 days a week. Call (754) 310-3589 to schedule your free estimate. A square deal, a straight quote, and a window that’s true. That’s the whole promise.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Davie since 2008.